Router Speed/RPM Control
 

Has anyone had any success or where to start on controlling the routers spindle speed via mach 3 control? What are most people doing? Are people just adjusting the speed manually on the fly or with a simple inline Potentiometer made for routers? It would be handy be able to use this funtion.

Thanks,
Travis

read travis read

start here

http://www.mechmate.com/forums/showthread.php?t=290

Irfan, I think that thread only addresses ON/OFF and not variable speed control?

Yes G' its a start - to start with -

then travis could also look at this

Interesting find Irfan!

Thanks for the link! Looks like it would will work up to 2.5hp or 1800 watt routers. I'll read up on it and see how promising it looks.

Travis if budget is not so very a constraint I would strongly suggest a 1.5KW chinese spindle with a 1.5KW Delta VFD, both put together would cost approx 600USD, and another 100 for water cooling maybe!

my best to you.
RGDS
Irfan