|
|
#211
Sat 27 June 2009, 10:19
|
|||
|
|||
|
Congrats Irfan.
By the way, I've used all three of those same techniques to trash carbide bits too. Luckily, mine were only $6 bits. 
|
|
#212
Sat 27 June 2009, 10:27
|
|||
|
|||
|
Thanks Hennie and Dough - couldn't have been without all the folks in this forum -!
and special thanks to G' R/ Irfan Last edited by javeria; Sat 27 June 2009 at 10:38..
|
|
#213
Sat 27 June 2009, 13:09
|
|||
|
|||
|
CONGRATS Irfan,
I know how important those numbers can be.  Lucky 13. 
|
|
#214
Sat 27 June 2009, 13:10
|
|||
|
|||
|
Irfan,
Congratulations on completing you build.
|
|
#215
Sat 27 June 2009, 16:20
|
|||
|
|||
|
Irfan, well done on completing the build (not that its ever really complete
 ).
|
|
#216
Sat 27 June 2009, 18:43
|
|||
|
|||
|
Irfan,
May I add my CONGRATULATIONS to you for your GRAND accomplishment. Fantastic!Here's the Updated Builder's Log. Please let me know the size of your machine for the Builder's Log. Also, please provide a different or modified "log comment" if you please. Regards, John
|
|
#217
Sat 27 June 2009, 21:00
|
|||
|
|||
|
Irfan,
Congrats on a nice machine. Mike
|
|
#218
Sat 27 June 2009, 21:29
|
|||
|
|||
|
Congratulations Irfan!
|
|
#219
Sat 27 June 2009, 22:02
|
|||
|
|||
|
Congratulations Irfan, good job. Wish you all the best success.
John
|
|
#220
Sat 27 June 2009, 23:55
|
|||
|
|||
|
Congratulations Irfan.
|
|
#221
Sun 28 June 2009, 00:46
|
|||
|
|||
|
33. That is a nice number. Well done and enjoy
|
|
#222
Sun 28 June 2009, 03:14
|
|||
|
|||
|
Nice carve Ifan.
Congratulatios !! I think we can make a data sheet for each machine with its complete specifications. For example: Dimensions: Motors: pinion teeths: Rack: Etc... And put this in a New thread.
|
|
#223
Sun 28 June 2009, 05:16
|
|||
|
|||
|
John - its a 50x100
btw my build date - John - does this count? http://www.mechmate.com/forums/showthread.php?t=196
|
|
#224
Sun 28 June 2009, 05:17
|
|||
|
|||
|
HI All - thanks for the congrats!
|
|
#225
Sun 28 June 2009, 05:58
|
|||
|
|||
|
Irfan, did any of the parts of that jackshaft table make it to #33? Doesn't look like it. I guess that #33 started when you closed the earlier thread - 1 October 2007?
|
|
#226
Sun 28 June 2009, 07:16
|
|||
|
|||
|
Well done Irfan....congratulations.
|
|
#227
Sun 28 June 2009, 07:58
|
|||
|
|||
|
Yes G' lot of the Metal was from there!
|
|
#228
Sun 28 June 2009, 16:11
|
|||
|
|||
|
Irfan,
Thanks for the size info. Updated Builder's Log is here. As for the build start date, that's up to you. Looks like Gerald is suggesting 1 October 2007. Let me know what you think.
|
|
#229
Mon 29 June 2009, 00:12
|
|||
|
|||
|
Well done Irfan! Congratulations!
|
|
#230
Mon 29 June 2009, 08:53
|
|||
|
|||
|
Congratulations Irfan, happy cutting!
|
|
#231
Mon 29 June 2009, 09:24
|
|||
|
|||
|
Thanks - again to all - so I have to transform myself to the showroom thread now
and start posting there! very soon there will be a lot to share! John - lets leave it as it is RGDS IRfan
|
|
#232
Sun 05 July 2009, 07:47
|
|||
|
|||
|
OOpss.. sorry i just saw the previous page and the very nice relief you did.. I am really proud of you Irfan...
I didn't find the relief at Artcam Forum..Can you send it to me or point the thread? What you did with that beautiful carving and where you installed it.. Regards
|
|
#233
Sun 01 November 2009, 11:50
|
|||
|
|||
|
some work done today
took 3 hrs - I love the artwork - from Issac.
size 12x18 inch, 6mm end mill for z clear and 3mm ball nose for final finish material MDF.
|
|
#234
Sun 01 November 2009, 20:37
|
|||
|
|||
|
Irfan,
That is awesome. I love the artwork as well.
|
|
#235
Sun 01 November 2009, 21:30
|
|||
|
|||
|
NICE Irfan,now you have to sand it
|
|
#236
Sat 28 November 2009, 05:11
|
|||
|
|||
|
some proposed mods to the z axis,
I got hold of some 25mm thk used rails in a reasonably good condition - so its time to upgrade my Z axis
, the same rack and pinion assy will be used.here is the proposed design
|
|
#237
Sat 28 November 2009, 05:26
|
|||
|
|||
|
Irfan,
Let me play the ignorant  Why change something already good….The original concept that is…for some other approach  If you’re not already on a Z-axis original system as design, why not make this “upgrade” to the original version Robert 
|
|
#238
Sat 28 November 2009, 09:59
|
|||
|
|||
|
Actually, I have already done with my current Z - due to my own overlooking- which I feel cannot be corrected/rectified, I am just trying to use the linear slides as I already have them with me.
I think I am on the original system/version - unless you prove me wrong - I don't exactly know what I have missed on the current Z - except for some of my own mistakes.
|
|
#239
Sat 28 November 2009, 21:46
|
|||
|
|||
|
I have yet to bend my Z-spider, in fear of some thing may go wrong... particularly concern about alignment. I couldn't give a solid explaination for the feling. Don't get me wrong, I have faith in Gerald's design.... just that erky feel of worms churning in me stomach when I think about how to get the whole assemble correct ...
|
|
#240
Tue 01 December 2009, 11:11
|
|||
|
|||
|
some pictures
have yet to decide on proper motor mounting- may finish it tomorrow.
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wood carving - Bangalore, India | issac winfred | Introduce yourself and start planning | 3 | Wed 12 August 2009 09:13 |
| We made it to #3 !! | WTI | Archives | 3 | Thu 05 June 2008 14:57 |
| Laser kits for India - out of Bangalore | javeria | Profiled (laser cut) & bent steel plate | 3 | Tue 13 May 2008 21:50 |
| CNC Router with Servo motors & belt drives (non-MechMate) - Bangalore, India | Irfanulla | Archives | 67 | Mon 01 October 2007 12:11 |
| Hi, new to the gang - Bangalore, India | ANIL | Introduce yourself and start planning | 5 | Sat 09 June 2007 09:45 |
