Originally Posted by jazial

ok, good to go, i will place my steel order on monday

thanks

i noticed you live at "fish hoek", is it mixed english/dutch language ?
i live near belgium border (200m) in losts fields, and the place is named "verloren hoek" litterally "lost corner"

i've translated almost all your drawings into solidworks (i use it every day at work), with BoM including weights, sizes, etc, etc...
i've a good level at mach3 (i've made a french version of it), i've made a couple of cnc machines

if i can help someone it will be a pleasure

Originally Posted by fawzikach

Bienvenue sur le site, si tu veux avoir des prix et des fournisseurs, y a qu'a demander.
Jazial est aussi sur le coup (il est à Lille) et plus avancé que moi . Ca fait plaisir de voir un autre français !
Bon courage à toi :) .

Originally Posted by remihelene

salut les gars, un autre francais s'est inscrit aujourdhui:)

y a til des fournisseurs en france?

suis deja en cours de construction de ma machine, mais pas dans ce style et depuis un bon bout de temps d'ailleur (finances obligent)
mais le style mechmate est tres interressent quand meme:D

Originally Posted by fsautai

Salut Mickey, i am too in france (le Havre) and in the process of cutting and welding.
I am having some trouble finding racks M1 in 15mm x 15mm, i found some of that stuff in smaller section (10x8) but they are super short in length (450mm).
were you more successful in you area? Good luck for your project and thanks everyone for contributing to the immense source of information found here.
F>

Originally Posted by grandpi

Salut,

Tu trouveras facilement du carré 15x15 chez www.descours-cabaud.com/,
un negociant de produit mecanique. Idem pignon.

A+,
Pierre.

Originally Posted by bbreaker

HI, I'm on this Forum from a long time, and i now start, i've got a big part of material, i just whait for the steel for the table, i have weld the Y-car this day, and i start the kitchen project, it's a little easier for me because 1 year ago i have built a small cnc for hobby and i've got the knowledge of cnc use.

I post picture soon.

Originally Posted by philippe

Hello everyone, my my is philippe, I live in the south of France, I'm 40 old, I work in aeronautics and I have decided to build the mechmate because I build rc airplanes in wood and furniture (sorry for my English, I used google and what I know in English)
bye

Originally Posted by ebarotte

is there anyone able to sell me the differents part of a mechmate ?
I need the base table too. Help because the isn't a mechmate community in france and i'm lost.
:(

Originally Posted by Sampic Yvan

Hello to all
Firstly thank you to share all this information
I intend to build a machine for personal use
I read, I read as shown on the forum and will certainly keep you informed of my progress
Again thank you

Originally Posted by fawzikach

Hy every one, i live in France near Metz (Moselle) and i am planing to begin the build of a machmate. I have red a lot of posts during the last 4 months and found a mine of helpfull pictures, and of course lots of quality explanations and unstructions.

This machmate is ment to be used in my place for various projects.One among them is to help me cut wooden solar cookers i used to do by hand , for educational purposes.

I also wanted to thank a lot Gerald .

Although i can weld , I can't say i have any skills in electronics or eaven elecricity and i am unfortunately not really able to understand a lot more than the basic principles about it .

Maybe that will make things easyer for me , as i'll only have to stick to the original plans and choice for components :) .

I will make my mechmmate thanks to the help of my friends , hopfully with some help of Jazial nearby , and whith some support of the mechmate community .

Thanks Fawzi.

Originally Posted by Pleyell

Je viens d'acheter les plans et je t'avous qu'avec mon anglais, je suis paumé complet. Si tu peux m'aider pour déja savoir par quoi commencer je suis prêt a une aide financière pour te remercier. Merci
Pascal