MechMate CNC Router Forum - Howdy from Manitoba, Canada

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- Introduce yourself and start planning (http://www.mechmate.com/forums/forumdisplay.php?f=88)

- - Howdy from Manitoba, Canada (http://www.mechmate.com/forums/showthread.php?t=3248)

MPMW	Sat 22 January 2011 01:37

Howdy from Manitoba, Canada

I was directed to mechmate by a fellow MB'er and I see there is lots to read up on. Looking forward to all the learning and pictures.
I am fairly new to cnc in mind and even less experience in body but hoping to change that in the near future.

Looking at a 4ft x 4ft or 4ftx8ft cut area with a vac table to cut polystyrene sheet.

If anyone cuts HIPS (high impact poly styrene) sheet I would love to visit about those aspects.

Kent aka MPMW

riesvantwisk

Sat 22 January 2011 12:18

Welcome MPMW!

lot's of information here, and don't hesitate to ask!
If in the future you are planning to cut 8x4, then I would suggest to make that right away, given you have the space.

Ries

tnarch

Sat 22 January 2011 15:16

welcome kent!

domino11

Sun 23 January 2011 12:39

Welcome Kent!

MetalHead

Sun 23 January 2011 14:13

Welcome to the team !!!

All times are GMT -6. The time now is 17:57.