Originally Posted by Gerald D

Hi Donna

My personal approach to a power supply for that choice of motors/geckos/PMDX is to build my own supply with a transformer, rectifier and diode. I am not impressed by the ready-built supplies available in your market, though I might suggest them from time to time for someone who is unsure about their ability to connect a transformer to a rectifier and capacitor. Seems like you will be comfortable to build your own?

I use a 300VA transformer at 28 to 30VAC output. Many others will use a bigger 500VA transformer instead - not much more expensive. Mike recommends around 24V, he likes cooler motors - I like the extra torque from the warmer motors.

We have the luxury of getting transformers made to order. We have another small coil put on the transformer for the 9V AC output to the PMDX. However, it is very simple to add that coil to the transformer yourself. This DIY extra coil has appeared in MM'ers photos without incident or discussion.

Too many words have been written on the power supply issue - it is a simpler subject than what it appears to be. :)