Used skate
 

Anyone have a used Grind Head - Assembly they are done with and would be willing part with?

Thanks
Chuck

Chuck,

When you order the laser parts, the parts to build the grinder assembly are included in with the other parts.

Look at parts M6 10 100 - and beyond of the drawing package. You will see the parts for the grinder.

Hope that helps you.

Thanks Nils,
I saw those drawings, but I just can't afford $500 in laser cut parts at the moment.
I do have access to some inexpensive angle, and a 4.5" grinder and wanted to get a start. This seemed like as good a sub-project to start with as any.

So if anyone has a used skate grinder assembly that they would be willing to part with, please PM me.

Thanks

Chuck, I just PM'ed you.

Joe

Chuck...
I'm in Weiser...
you can use mine...
just email me ([email protected]) or call (549-2320)

Chuck

The eccentric bushes of the skate are mostly removed for building the z-slide. That means you will probably not be offered a complete skate.

Altough I had both parts for the skate I did not use it the way it was intended to be used and I must say that it did work well.Try and get the part that go onto the grinder that is all you need and some brainwaves ( sorry I don`t know the part number have not even had coffee yet )Look at my tread there should be pic`s.