I'll PM you

laser cut parts
 

Mike thanks for the reply I'm sure these have been asked before but i still have questions about laser cut parts. Do the laser cut parts come with marks for drilling all the holes or are they done by the laser also the slots same question. the plans do not have measurements for the hole locations that i can find (maybe I've missed something)anyway!! Thanks for your help and to all the others on the site for all the great info. I'm hoping one day i can build me one.
WOW What A Machine.

Pauld,

If you have not downloaded and printed out the drawings that Gerald has provided you need to do that. You can also look at the drawings. I don't mean to be rude. Part of building the MechMate is to do some of the leg work.

We are happy to answer all your questions, but put the work in also.

Yes the lasered parts come with markings to help you drill the holes.

I think we need to build a MechMate Robot and send her with each of the builds to assist every one. Fetch the 12 mm bolts and bring me a drink.:D

That would be a great treat ! LOL

http://www.mechmate.com/forums/showt...8&postcount=19

The spider has etched locators to help align the V-Rollers, but the rest of the parts mostly have precut holes. The drawings and common sense (which aint so common by the way :) ) do the rest.

The whole Y-car assembly literally snaps together. It is actually difficult to take apart it fits together so well. A very nice design and very ridged after it is welded. This site even covers what steps to weld the Y car.

So reading here is a must. I say this site is the assembly manual for the MechMate. By how it is layed out you can pick the area you want to study off the main forum page and read all the feedback on that section.

I'd say 99.9 percent of the time if you have a question about building the MechMate it is in this forum somewhere. If you can't find it after truly looking for it (We will know :) ) then just ask. Someone can point you in the right direction.

Even after over a year I still read here daily and study the drawings a lot. But the best thing to do is dive in.

Update on Parts - The parts are heading over to the bender this week. So I am on track to have them back early next week. I will let everyone know when they are ready.

How much for your parts kit. looking to start soon

zip code 49014
[email protected]

Thanks

Sent you a PM

Thanks for the PM
price looks great and will be starting soon

Tim

How much for your parts kit? Thanks.

I'll PM you

Looking for a price. Zip 95355

Looking for a price on the laser parts, Thanks John

Zip 91016

I PM'd you

podunk - I also PM'd you

MetalHead please PM me with the price too 97007.

How much for your parts kit. looking to start soon.

Zip code is 72442

Daoneua and Potter I PM'd you both.

I still have 4 sets of parts in this batch please PM me if you would like to order a set.

Hey Metal! how much for a set to 08204. Would you mind sending your phone # with the PM so I can ask you a few questions? Just want to make sure I'm ordering everything I need. Thanks

I sent you a PM

mike ,
congrats on your recent venture, good for you
I am fairly new to the sight but was glad to see you take over the helm.
anyway, I am also interested in price on your kit
thanks:)

Sent you a PM

How Much for a parts kit to 94403

Peter - I sent you a PM

How much for parts kit to 52638

Sent you a PM

Let me know if you need MechMate parts in the United States !!!

Laser Cut and Bent Parts
Machined Parts
Other MechMate Parts

Just send me a PM or an email and I will get you what you need.

Mike

Machining
 

Metalhead Mike, do you also supply custom parts? I don't have a lathe (yet).
And what is your rate/hour or do you do flat rate for required parts maching?

Thanks Dan

I sent you a PM.

Yes I can do custom machining.

Mike