MechMate CNC Router Forum

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)
-   Construction started, but not cutting yet (http://www.mechmate.com/forums/forumdisplay.php?f=77)
-   -   Gantry and Y Car Welded! - Smiths Station, AL (http://www.mechmate.com/forums/showthread.php?t=3730)

Tom Ayres Fri 20 March 2015 13:11

I looked at my set up and as far as I can see the R & T are the 2 legs the W is neutral and the Ground is green.

HomeMadeCnc Fri 20 March 2015 14:04

1 Attachment(s)
Heres my basic setup
Incoming power on the left and spindle on the right

Tom Ayres Fri 20 March 2015 15:07

oops, I guess i had better look at mine a bit better, all my wiring is black and numbered and didn't look at it correctly while hanging my head upside-down, sorry:o

1planeguy Fri 20 March 2015 15:34

Tim, you being in Canada would be the same standard as the US, at least on being 110v based, as opposed to the UK and others that get 220v on 1 wire. For US/Canada to get 220v we have to use 2 110v legs. Now by colors you are attaching the ground to the R terminal...I thought the ground was supposed to tie to the pin 9? Are your colors off, or am I REALLY lost?

HomeMadeCnc Fri 20 March 2015 16:28

Oh just a wee bit of custom wiring going on ;)
Your correct .
I didn't have the correct color of wire so red it was.
I'm no expert, I still think its all PFM <--old aircraft term meaning Pure F--king Magic

1planeguy Fri 20 March 2015 19:18

I'm good with "custom" color codes (lol) what is attached to what though? Which is wired to the 110v leads and which is the common? (Does it matter?)

HomeMadeCnc Fri 20 March 2015 21:17

Miss read the question sorry, I already have a 220v feed in the shop. I had to split it to 2 circuits of 110 for the computer and outlets on the side of my machine.
As for your specific VFD hook ups I'll plead the 5th and ask you to refer to your owners manual. I'd hate to give you the wrong info and you having to deal with that black curl of smoke.

http://www.sawmillcreek.org/showthre...2-x-110v-plugs

bradm Sat 21 March 2015 00:47

Yikes! See this thread

In North American single phase, it's two hots (red, black), sometimes a neutral (white), and a ground (green). Between the two hots is 220V. Between any hot and the neutral is 110V.

Inverters are designed to output the same voltage that is input. They work by rectifying the input into DC, and then regenerating three phase output with variable frequency to control the motor speed. 220V spindle needs a VFD with 220V input.

Because of that rectifying step, inverters don't care if they have single phase or three phase input, as long as the amperage draw doesn't exceed the capacity of the rectifier, and there is sufficient capacitance designed in. In the single phase case, you are drawing all the amperage from two, not three wires, so the amperage is higher. It's usually only at the low end of the wattage range that inverters will support single phase input - it becomes too inefficient to carry large amounts of amperage on two wires as you move up higher.

So, you should be connecting black and red to R,S. T disconnected. white disconnected. Green to ground. U,V,W to spindle. You should measure 220V between the two legs you connect to R,S.

Now, it turns out that connecting white to T is kind of moot, because the input rectifier ignores it in favor of the higher voltage available between R and S. But it isn't correct.

1planeguy Sat 21 March 2015 14:39

Good info Brad...got a grip on it now. From what I've read, it does no harm to the spindle to do basic "yes it turns" testing without the water cooling hooked up...just talking about, yes we are turning and stop. Anyone actually done this or is that living dangerously?

Gerald D Sun 22 March 2015 04:26

A short bench test with no water is fine.

(When I was in the auto industry, with a little dyno testing of car and truck engines, it was tempting fate to start an engine after filling it with water . . . . too often one had to open the engine and work with water everywhere)

1planeguy Sun 22 March 2015 07:53

Thanks Gerald...Will make it spin today, hopefully.

1planeguy Wed 14 October 2015 08:56

Somewhat "semi-related" to a Mechmate question...

Friend is a prolific model boat builder and ask me to machine a couple of plugs for fiberglass boat hull molds. Have years of 2D cad experience and years of 3D parametric modeling experience (specific to structural steel industry) but this is a different animal. I "think" I need to approach this from a 3D mesh direction but am open to suggestions if anyone is fluent with this. Have an older version of AutoCAD (2002) that does everything I ever need outside of my work 3D software...it has 3D capabilities (extrude 2D objects to 3D etc....). I've been watching some tutorials and have some ideas...the back half is actually easy to model...the bow area has me scratching my head. Example picture attached.

If I can generate a .stl file then importing into VCarve pro 8 and generating toolpath is a cakewalk...no trouble there.
http://www.kilocharlie.us/MechMate/pictures/hull.jpg

pblackburn Wed 14 October 2015 10:34

I will take a stab at trying to answer this, assuming I understood the question correctly.

If you are going to model it outside of Vcarve or Aspire then you will have to import in with one of their supported formats. I can tell you that it will import a rhino 3dm but as with most modelers the file will when opened with appear boxy and not smooth. That is the nature of how most cad programs save. They do not save as a mesh. So if you import a cylinder into VCARVE saved as a dxf or 3dm you will notice it will be more of a polygon than a smooth cylindrical surface. The only way I know to do it is as a mesh as you suggested. I don't know the software you are using but if it is Rhino, there is great information online on the best start points when using the Mesh command.

Tom Ayres Thu 15 October 2015 04:35

If you are copying the model above, you might be able to use a probe and 'plot' the image.

1planeguy Thu 15 October 2015 07:46

Don't have aspire, and looking at the upgrade fee don't think I could justify the cost...That said, I think I can make it work in AutoCAD 2002...have been able to extrude some shapes along a curve (to model the bow area)...think some combination of extruded solids will actually do it.
This has been an interesting project already...learning something new always gets me excited! Always like a challenge!

dbinokc Fri 16 October 2015 17:18

How did the person who made the mold create the shape. Was it hand carved or was some cad software used.

1planeguy Fri 16 October 2015 18:43

My friend actually made the original plug using good 'ol tried and true sanding templates and jigs...hours and hours of sanding. He wants to jump up into another model boat race class and needs that plug enlarged 17%.

dbinokc Fri 16 October 2015 19:38

I guess if I had a similar task things I might try in no particular order are

1. Touch off probe with my mechmate if the height were not too great
2. Touch off probe in my dro mill
3. If the sanding templates fit close, use those get 2d profiles
4. Contour gauge to get 2D profiles

To smooth things out once the points are in the software, I would try to find something that could generate 2D bezier surface from a mesh

I am just throwing ideas out there. Not sure what would be practical and what would not.

spyderxxx Sat 17 October 2015 07:12

What about Delftship free. It's a program used to design boats. Not sure if it exports STL files.

pblackburn Sat 17 October 2015 23:04

You can bring point clouds into Rhino and it will create a surface from the points. That is another option.

smreish Mon 19 October 2015 06:00

...If you don't have a touch probe, which wouldn't take to long, I would put an ad on Craigslist or other for a local person that may have a David's scanner or other scanning tool. Something that small should be pretty cheap.

1planeguy Tue 09 February 2016 16:07

Well ladies and gentleman, have a deal for someone. Thanks to an impending job change and move, this Mechmate project is going to have to go to someone else. Gonna have no good place to finish it and with new job, no time to finish it...such is life.
I'm offering the whole lot up for sale, the project is pretty well documented on this blog up to its current state...still work to do, if you have the itch to build there is plenty to do to scratch that itch. If you are looking to save COUNTLESS hours researching part suppliers and ordering parts, studying wiring diagrams to layout the kitchen table project, then this is the deal for you.

Wide flanged beams for main rails, was designed to bolt together, Frame parts were made on a CNC beam line (huge machine...crazy accurate)... setup for 5'x12' cutting area

If interested, reply to this thread or PM me through this forum. This project is in the state of Alabama, U.S.A. Can possibly arrange delivery (have trailer and some time...buyer paying cost of said delivery obviously...within reason, not crazy about going coast to coast)

Asking $5500...contact with any questions

darren salyer Tue 09 February 2016 20:03

Sounds like a steal for someone. Congrats and condolences all rolled up in one on the job change and move.

Nikonauts Wed 10 February 2016 02:14

http://i.imgur.com/fewz7.jpg

Robert M Wed 10 February 2016 07:36

Love it...bro @_# !!


All times are GMT -6. The time now is 00:10.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.