And progress so far ..
Attachment 7836

Attachment 7837

Attachment 7838

Attachment 7839

Attachment 7840

Attachment 7841

Wiring started, pictures of whats done so far ...
Attachment 7842

Attachment 7843

Attachment 7844

Attachment 7845

Attachment 7846

Attachment 7847

Still need to get Teflon washers for motor mounting and pivot points. Also wiring need more tiding up and most probably all of the MM need another coats of paint :) Thanks for looking, Anil

great work

I like Red and White.

Thanks Sharma, I hope its allowed :)

Here is final piece, the Z-slide mounted, I was waiting for the motor for Z but couldn't resist and mounted the old round motor for now :)
Attachment 7858

And now back to control box and wiring.

Almost there
 

After encouragement from fellow member, decided to post pictures of my control box (Biiiig one :)).
Attachment 7942
Green is power indicator and other 2 red are to indicate 2 relay outputs, spindle and dust collector.
Attachment 7947
Attachment 7945
Attachment 7946
Attachment 7942
Attachment 7940
Attachment 7941
Attachment 7949
And hand made Bob till PCB is ready, for testing
Attachment 7948
Transformer has 3 tap so that motor voltage can be tweaked.
Attachment 7950

Plate where all ground wires terminates
Attachment 7944
It look fine except bad paint job done by me as usual :)
Attachment 7943

Nicely going ANIL….
It sure looks like you’re very close to a rolling day!
Wishing you all the best and a smooth final tuning !!
Amicalement, Robert ;)

Cool man !!!
Now start making dust and get first 2010 #

Good Job ! Take care to have the control box cleaned out of any wire pieces lying around, thy make beautyful sparks!!!
Happy New Year!

Thanks Robert, Sharma,

Hope to qualify for first # of 2010 :)

Right Claus, it gets a vacuum cleanup after wiring done. Wish you and all here a happy new year.

MM Logo
 

Wishing all at MM forum a Happy new year 2010 :)

Got Logos printed, will paste them today and do a pen test as I don't have spindle/router yet.

Go Roaring Anil. All the best. Happy New Year to one and all at the Forum too.

Way to go. Lets see those pen marks!

Its moves :) :)
 

My telephone (internet) was down last few days and could not update.
After pen marks (in first pic, those marks are supposed to be roadrunner :)), I moved on and installed a die grinder I had in place of spindle and finally it makes dust..

First few final shots with logo pasted
Attachment 7994
Attachment 7993

Z-proxy is mounted directly on spider plate, a bit off center, It works fine.
Attachment 7995

Quick change mount works great, and here is die grinder in place..
Attachment 7996
Attachment 7997

Broken my first router bit in MM, my mistake instead of typing -0.1, typed -1.0 for the Z and the machine happily plunged exactly 1 inch without a strain :)
Attachment 7998

Now using a broken drill bit for testing :)
Attachment 8001

And look at the dust, huurreey...
Attachment 8000

Here is closeup, size is approx 12 inch, rapid 400 ipm, feed 50 ipm, broken drill bit approx 1 mm.

Attachment 7999

Yippie !!!:D:D:D
Congrats for the first MM # in 2010 !!!
Nice Carvings...

Thanks to Gerald, Claus, Leo, Pady, Irfan, Robert, Sharma, Chopper and all the members for looking at my build, not good looking but it works :D:D:D

I'm sorry if I forgot to mention any names, no disregards please :)

Well done Anil!

Great job Anil! Congrats!

Thank you Gerald for the #44 :D
Thank you Ken. Need to do the PCB for BoB today as I am still using my handwired board.

Well done ! I presume you have the same feeling when you see that monster who was a few month ago just some metal bars, wires and now is moving.

Anil

Congratulations on #44.

Isn't feelings are such that when we see newborn ?
Congratulations on first #2010
Welcome to growing Indian MM club.
And don't worry about broken bits, now we have good (cheap) source, don't we ;)

Well said, the feeling is exactly same :)

Congratulations Anil! :)

Well done Anil...let the real fun begin....

I am very happy for you Anil. You have done a great job on your machine.

Enjoy , and well done Anil

Thank you Kobus, Leo, Heath, Hennie and everyone, I got ideas for executing bits and pieces from almost everyone's thread :)

Félicitation Great for you 1 instead of .1 not as bad as 5 instead of .5 happy pole vaulting