Kobus if you do offer make it low,That thing can make wooden basins.

Just had another thought My one arm bandit that I am building with a 1200x620 cutting area will fit in my budget of 1/2 of what that chap wants for the machine.

Thank's, will go in LOW and refit with Mach3 and 3kW spindle and see what happens.

I agree with Gerald, Wadkin was known for making really strong traditional machines, am not aware of them ever doing anything electronically controlled. They went bust before the upswing in NC controls of woodworking machines. The "Wadkin" machines available now in some markets are produced mostly in china and only have use of the name(correction some machines are still made in the UK, but still not quite like the old cast iron ones). They went bust because their machines were too good and lasted too long, not enough people replaced them if ever - I have a 1932 spindle in my factory with original oil pot electric overloads, works everyday - you cant kill these machines. Offer him just a bit more than scrap value, the fact that its got a controller on it is academic as its bust anyway.

Hi

Here is mine Wadkin CC2000 that I refit. to mach3.
some pic. and video

Very very very nice machine! Today industry sure discards some nice machines in favor to something new and a bit faster. Better for us enthusiasts!

Very very nice...so getting rid of the HEAVY spindle motor that was on there and putting watercooled spindles on, did it improve the Z-axis resolution for 3D work.

wet my floor drooling....

Hi Ken, can I ship it tomorrow over to you. :D
The guy accepted my offer. I am in the process of getting a rigging company to give me a quote for moving the thing.

Kobus, I'm up for adoption... :D

Well done, thats probably going to cost you more than you paid for it (moving it...and adopting Ken!!!!)

It have one air cylinder connected to a chain that again is connected to the Z axis. so you just adjust the air pressure until it pulls with the right kg on the Z axis. just like the gas spring on the mechmate

Mike,

What do you cut with your fancy two spindle machine?

I cut mostly plastic parts for one of my customer

2 of each...:D

And since mach3 control cabinets are so small, you can use that old control space as a shower for hot days :D :D

:D:D

Not my weekend
 

This weekend was not the best.
I had to do to many things...can't we work on weekends and stay home during the week to play with our machines :D
My wife finished 2 x stained glass windows and I had to go and fit it.

Attachment 12732

Attachment 12733

I am also making 2 x wine tables for a friend. Solid white oak with carved grapes on the top with a glass top reccessed into the wood.

Carving took about 3 hours on this 600mm top. At the end I checked and found the glass to be a bit tight. Thought I will give it another 0.2mm freedom for the movement of the wood.
This is where it all went wrong.
I thought 0.2mm off an existing cut 6mm deep in one pass...NO PROBLEM in oak.
Somehow my program thought I wanted to cut with a 1.5mm bit....all day I was working with the 6.35mm bit.
Result is that the 1.5mm code put the 6.35mm cutter into virgin wood....by the time I got the message and hit the e-stop it was to late.

Attachment 12734

Attachment 12735

Compliments to the wife those windows are very nice, Eisch dont feel bad Kobus I have some of those 'aag-nee! hanging on the wall

Thank's Hennie for that sleeper wood you gave me at our Woodworkers show.
I made something special for a special friend.
The bottom piece I got from another friend in exchange for some cutting work.
I think it is also teak, just about 100 years younger.

Attachment 12743

I like it rough.:D

I am getting worried about you two.:)

Maatjies :o

So when do I get adopted? :)
I'm all packed up & ready to go :D

:D Anytime, my place is alway's open.

Ken ,Your place is booked in the chicken shed:) Next to the MM.Kobus me and the rep from the bamboo place wants to do a presentation at your woodworkers club next year.

No problem, they are looking for people to give talks....as long as there are some free bamboo samples..

Baie!

Chicken shed is fine :) As long as there are enough hay.
Can I have the Wadkin Control panel? Will make it into a cosy Sauna in the shop... :D

Waiting for PROMISED BAMBOO...Using Rosewood
 

I know I guy...Let's call him Hennie....to protect the innocent...:o
Promised me some Bamboo....but now he is making his Christmas presents..
So when I did not get any, I hauled out a piece of Rosewood, Re-Saw on Bandsaw 1/3 - 2/3 and made this SAMPLE knife box for a knife maker in Bloemfontein.

Attachment 12771

Attachment 12772

Attachment 12773

JY moet kom haal hier in die wesrand die ander Brakpan.

2 x Wine tables done and delivered.

Attachment 12784

Attachment 12785

Wow Kobus, dit is stunning werk ou maat.

uitstekende vakmanskap Kobus!

You are making great use of your indexer! :)

That looks very nice. Did you turn the base?

Sorry to dissapoint you guy's, but the time was against me, so a friend turned the base by hand while I did the carving.
I like your AFRIKAANS Heath :D

Kobus,
What wood did you use on the table?

Normal White Oak

Question to my computer geek friends out there.
I want to change the display size on a LED monitor. Full display must be about 25mm smaller than the border. I don't mind the Black frame around the edge, as long as the program (for instance Mach) is displayed correctly on this smaller screen.
I don't want to 'Restore Down' to make the Mach screen smaller because then not all Mach pictures are displayed.
I have a small 15 inch screen that I will fit in my new Wadkin CNC.
If I put it on the inside of my box then the X-size is about 20mm too wide.
I can make it fit on the Outside of the box, but would prefer the inside fitment.
...And I don't want to buy a smaller screen..;)
Thank's

Awww, here I thought that was done on your indexer! :):D

Hope I got it right, I might have said you car needs an oil change. :D:eek: