MechMate CNC Router Forum - Machine now cutting!....Seahorses!

Page 3 of 3

Show 40 post(s) from this thread on one page

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- MechMates already cutting (http://www.mechmate.com/forums/forumdisplay.php?f=78)

- - Machine now cutting!....Seahorses! - Skopje,Macedonia (http://www.mechmate.com/forums/showthread.php?t=3542)

Pajka

Fri 15 February 2013 16:07

6 Attachment(s)

ММ is a good machine

Pajka

Fri 15 February 2013 16:10

1 Attachment(s)

perspex

MetalHead

Fri 15 February 2013 20:36

Cool - Do you have a logo on your machine !! Congrats on getting it cutting !!!

javeria

Fri 15 February 2013 21:12

Hello - What vacuum pump are you using for hold down.

Pajka

Sat 16 February 2013 08:32

Pump with water ring,5.5 kw will arrive on Monday.Will inform how it works after installation.

Pajka

Sat 16 February 2013 08:34

Thanks Mike,still not but soon will have.

gorantec

Sat 23 February 2013 07:37

Wow this is excelent machine !!!

Прекрасна машина со среќа !!!

Pajka

Sat 23 February 2013 11:13

Thanks my friend.

pblackburn

Sun 24 February 2013 10:08

Looks like you are having fun with the projects from the Vectric newsletters. Great job by the way.

danilom

Thu 07 March 2013 14:33

there is more than fun happening at their workshop when I am around :)

like this:

http://cnc.rs/images/img_2301%20medium.jpg

and this:
http://youtu.be/MYkiH0CjJS4

7 meters long , 500mm high acrylic led light letters, with custom controller from me.
After being mounted expect more pictures of letters and ACM facade.

pblackburn

Fri 08 March 2013 15:21

But if it was not fun, you would not be doing it. Right?

pblackburn

Fri 08 March 2013 17:30

How did you go about the lighting? Individually controlled through a controller but is there a letter cutout and the letter inserted in it and the wiring from the back? Great video

Hardouin

Sat 09 March 2013 16:25

Hello !

Thank you for sharing your great work !

Could you tell us dimensions of your MechMate ?

Pajka

Sun 10 March 2013 01:26

1500/3200mm working area

danilom

Sun 10 March 2013 12:56

Its led strip with sticky tape behind so its just cut to segments placed on the back of the letter and then soldered individual segments inside the letter.

pblackburn

Fri 15 March 2013 15:17

Danilo,
Sorry for the late reply. Thanks so much for the info. It is always nice to see how people do things.

Hardouin

Fri 15 March 2013 15:45

Hello !

Could you tell us which breakout boards did you choose ?
Are you satisfied with them ?

Hardouin

pblackburn

Fri 15 March 2013 15:52

PMDX-126 breakout board with the PDMX-134 motherboard. I have two parallel ports to the board to utilized the full features of the board. It gave me the option of using the PMDX-108 and PMDX-109 later if I wished to. The 126 also allows me to add a 5th drive for my 4th axis. The board has not caused me any problems and I am pleased with it's performance.

HomeMadeCnc

Thu 18 April 2013 17:52

Very nice job!

danilom

Wed 17 August 2016 13:41

After one more visit to my friends in Macedonia, these are the new additions

Massive chinese two spindle router (yaskawa servos , 6hp HSD spindles)

http://www.cnc.rs/mechmate/Weihong.jpg

Trusty MechMate is still right beside this beast

http://www.cnc.rs/mechmate/Weihong%20and%20mm.jpg

But improved with CS-Labs ethernet CSMIO IP/S 6 axis motion control and redesigned control cabinet

http://www.cnc.rs/mechmate/Mechmate%20CSMIO.jpg

All times are GMT -6. The time now is 21:52.

Page 3 of 3

Show 40 post(s) from this thread on one page