MechMate CNC Router Forum - It Cuts the Wood and Aluminum #76

Page 3 of 3

Show 40 post(s) from this thread on one page

MechMate CNC Router Forum (http://www.mechmate.com/forums/index.php)

- MechMates already cutting (http://www.mechmate.com/forums/forumdisplay.php?f=78)

- - It Cuts the Wood and Aluminum #76 - Guadalajara, Mexico (http://www.mechmate.com/forums/showthread.php?t=3161)

rceja

Thu 24 February 2011 20:21

1 Attachment(s)

One more picture, this one is our first cut of this kind.
Is 3 mm MDF. cut depth 1.5 mm

Gerald D

Thu 24 February 2011 23:46

That made a lot of dust! :)

rceja

Fri 25 February 2011 08:16

Certanily Gerald it did!!!!, We want to thank you again for sharing this wonderful project :)

rceja

Sat 16 November 2013 22:30

1 Attachment(s)

after a long time out of the game, finally we are on again in a new location.
I this place it is quite difficult to get a 220 vac line, so we decided to rewire a toroidal transformer to drive the VFD for the spidle. It worked fine !!!!!!!

rceja

Sat 16 November 2013 22:48

1 Attachment(s)

Rhis is a gif picture of the arrange

MetalHead

Sun 17 November 2013 06:26

Welcome back!

All times are GMT -6. The time now is 08:00.

Page 3 of 3

Show 40 post(s) from this thread on one page