Conrado,

What are you going to cut the Kayak out of?

Hi nils
i will be foam, i divided the kayak in 6 parts to fit in
later they will be glued, and covered with fiber.

the finish results from this method not are very smooth.
Normally, the fiber is copied from a real kayak up and down sides and next glue the sides.

Aunque no está mal como experiencia para otras aplicaciones, como crear mapas en relieve sobre Poliestireno expandido (foam), de zonas geográficas.

¿Que tipo de foam utilizaras?

Poliestireno expandido.
ademas de un acabado de lija y bondo automotivo y pintura

Hi Conrado, great MM .You might try this link for 3d fish.

http://mechmate.com/forums/showthread.php?t=1200

Thank you, I ´ve already downloaded some files.

Hello,
my MECHMATE still going strong and reliable, Can I get a Serial Number??
Cutting area 2400 mm x 2000 mm , cutting device Router, .

planing to add aditional axis.





here are some pics

Attachment 8929
Attachment 8930
Attachment 8931
Attachment 8932
Attachment 8933


best regards!!.

Conrado,

How about a close-up of the cat, dog and + sign?

sure, those are for my Vet sister, I have no pictures of most of the work I´ve done, but it goes from Signs, cutting stainless steel, and the last one was a stich&glue kayak .

Looks Well used for sure!!!! You get #55 Congrats!!!!

yeahhhhhhhhhh!!!

Congratulations #55 from #54

Builder's Log Update
 

Conrado,

Congratulations on completing your MechMate and on Serial #55.

Here is the Updated Builder's Log.

Please review your entry and let me know any changes you want to make.

Well done Conrado! I like your economical cable chains.

they are ¨not definitive" haha

any one who has a "spare" cable chain let me know.
my budget is limited.

cheeers!

Congrats Conrado #55! I admire your patient & perseverance to complete the machine.
Love your "cable chain" too. How about placing a fixed cable tray or board along the cable for the belt to rest on?

Conrado,

Congratulations on the #55 and completing you machine. Welcome to the club.

Congratulations Conrado!

Hey !! This is great amigo ;)
You must be a V-happy man, plus the hole week-end to tune & play with the new “toy” :D
I must say I envy you as I was hoping to get that n°55…. There’ always other ones :rolleyes:
Well, congratulation and hope all will be fine.

well.. I have to say, my MECHMATE is working long time ago, just wanted No 55.
got the stikers. and wait.

Every Work is better than the last one, the key is planning very carefully each project. Now I can do Everything I Imagine.

Felicitaciones Conrado!

Well done, Conrado. Como esta todo en Obregon ahora? Jose #53

Todo esta de maravilla, el clima esta, bien, aunque ya empieza el calor
pero con los paseos en kayak sera una bendicion.
Ahh y las mujeres son bellisimas aqui!!!

Pero no son como las tapatias in Guadalajara!

puees te dire!!, he andado por todos lados, y no me muevo de aqui

ademas... nos hacen caso a los feos!!!


saludos

MechMate Prime
 

Robert: I was bummed when I got pipped at the post for #52 until I realized that #53 is a prime number. I think all MM's with prime serial numbers should be painted with a gold racing stripe.:D The next prime in the series is 59. http://www.mathsisfun.com/prime_numbers.html

Joe

As a Chines I'm hoping for #60, #63, #66 & #68 which are all auspicious numbers.
BUT 69 would top it all even though its not an auspicious number...

69......;):p