This is just to let people out there what a laser can do.:cool:


It was cut from .25 inch thick Lyptus Wood. It will be going on a grandfather clock I'm making. After I complete my MM.

How strong is this laser?

watts
 

Stefan, They had three lasers machines there. The Mac Daddy I think was 2000w. and could cut 7/8" inch steel. He also said that they had a 6 digit power bill one month.:eek:

Looks like I'll stick to router bits for a while,... :)
Stefan

Joe, do you plan to remove the black where the laser burnt its way through?

Joe,

I would like to be included for a mamba set and bearings.
80124

Justin

Hi Joe,
I'm interested in the mamba set and bearings. 28730.
Rick

Joe,

I'm planning to get the mamba set with Sean in FL. However the deal on the bearings is good. We need 10 right? If you don't mind sending me just those, I'll pm you my info. Do you happen to have a paypal account for easy transfer?

Stefan, 34285

Joe you have my name on the list for the cut parts allready but I would like the bearings also

Joe,
I would like to add bearings to my set also.
Thanks,
Krod

Bearings for me too!!

Joe,

I would like to be included for a mamba set and bearings.
83702

Thanks
Ken

Parts
 

Look what I got today!!!!:D


Everything looks as they should and goes together like it should!!


The only bad thing is Myozman (Mike) called the first set.:(

Now to get going.:)

OK I am going to pull the trigger and get a large batch on Thursday afternoon!!

As of now I have orders in for the following people:

Greg A
Revved Up
Mark Shlaes
Sailfl
Kevin L
Kevin
Kwang 90020
Mattbyrne
Ekdenton
Lunaj76
Cardin1
303mm
ME:)

If I forgot someone, Please let me know. I don't want to leave anyone out and I'm going to keep mine this time. I don't mind ordering parts in the future but in 5 or more quantities. The price might change too due to rise of steel and labor.

I am taking payment by Paypal (its fast and free) for the parts at this time. This way I don't get stuck with extra sets and finance charges.
At the time of shipping I will send you a email telling you how much shipping is to your location. This will a 60LBS box. UPS Shipping & Insurance to Myozman was $40.00. Shipping to a business will be a little cheaper than a residence.
So, all that been said, email your: Name, Shipping Address, If you ordering bearings (qty) and I will tell you the email to send the money to on paypal.
This way I won't get racked.:D


Thanks
Joe Mclain
[email protected]
205-837-3313

Just as a note....
I am still going to be running a batch of parts in Florida, but it will be a number of weeks. I am truly in the weeds with work and won't be able to dedicate the time to "go over and sit at the laser" for a while. Stefan and Nils, if your in a hurry, I would jump on Alabama pricing.
Sean

Sean

Thanks for the update. I can wait so I am passing on the Alabama order. I don't see me starting for a couple more months so I have time.

I'll for the FL batch,...
Stefan

Joe,

Got them today. Awesome! They look good. They dry fit good, really nice bend job.
Time to get on the stick and get ordering.

Let me know when everything goes through.

Mike

parts
 

I talked to the laser people on Wednesday and they were finishing up with cutting them.
He told me that he would ask them to put a hurry up on the bending. This was the longest part in the process, on the first run of parts.
I know that everyone is eager to get their parts as much as I am to get mine, so be patient and I'll keep bugging them.

Thanks
Joe

I am plenty patient and would rather wait than have them rushed and not be accurate.

Thanks for making this happen Joe.
:D

Packed and Shipped
 

Giving you guys something to look forward to this coming week.
I am shipping out the laser cut parts on Friday 14th!!!
I have one if not two extra set of parts and bearings, if any one missed out earlier.

WWoooohoooooo!!!!!!:D:D:D:D


Thank you very much Joe!!!!

Yeah, what Ed said!

Joe,
Is that a complete Mamba laser cut parts list and bearings? If it is, how much?

I wouldn't mind stocking up for the next build. :)

parts
 

Greg as long as the price of steel and operating cost stay the same, the price will remain $383.00 plus shipping.(25 parts and 8 bearings)

I will take orders for the next batch of 6 or more.

part
 

Joe,
Please add me to your next batch my zip is 76118.

Mamba Parts
 

People are wondering what parts are in the Mamba Kit. It is every thing under the "Full Options" category, plus a extra motor plate.:cool:
Attachment 1091

I am taking orders for the next 6 or more.

Joe,

Don't count me in on this order. This project is taking allot longer than I wanted and by the time I'm ready for number 2, the design will have changed.

Thanks for you help.
Greg

Parts came today THANKYOU JOE!! still haven't had the chance to open them up I have to finish cleaning off the workbenches that will hold the kitchen table project. then I will start and post pictures as well.

Again thanks!

Got my parts yesterday and put the car together to see how it fit. Very nice fit, no gaps anywhere. The spider had stress cracks on the outside of the bends but not bad, I will fill the cracks with my mig and sand flat with a flapdisk. The spider did have the hole locations etched also, that was nice. I think they did a great job cutting and bending:D

Got mine too Joe. Very cool. Thanks so much for getting this organized!

I received mine yesterday. It fits good. Joe, Great job. Thanks.

Joe,

Got the Direct drive motor mounts.
Send me the bill..

Thanks, Again,

MIKE

For those wondering how good of a job Joe's suppliers did...

I just unpacked my parts and snapped them together and fired up my MM. No welding required.

Just kidding of course but they are just about that good!

Well done Joe! Thanks again

parts
 

The process was very easy, it made doing it a pleasure.:D
Don't You Wish the rest of the build would be so easy.
Good luck with your build.

Joe

Count me in..
 

I'd love to get in on the next order. Email address is [email protected]

Thanks!

Hello Joe

Let me know when you run the next set I will take one. Thanks

[email protected]

Hello Joe,

This is my first post to a mechmate forum.

But, I have been doing some reading around this site for about the last week and am very interested in getting started with a build.

I too would like to order a set of the laser cut parts.

If you are located in the Birmingham, AL area, I am only 3 hours away from you in Houston, MS 38851.

You can e-mail me: [email protected] to let me know about payment.

Shawn Carter

Hi Joe,
Sign me in for the next Mamba kit batch...78557
Hector Quintanilla