We needle to install the cable chain and to fix the Mechmate logo.
Where i can to find the standard Mechmate logo?
Thank you
Valdir

just cable carrier Installation

Hello Folks, two works .

http://www.youtube.com/watch?v=4Y8NUK_tbi8

Vladimir - I am amused at the way you hold the parts - with something as big as a Mechmate its quite difficult.

nice work though :)

Vladmir I sometimes use the same principal, except I use small sticks 18" or so long. I have cut the ends off by mistake several times. If you continue this hold-down method you will too. All I needed to do was cut more sticks. What will you need to do ???????????????????? :(

Nice cutting machine :)

I will answer that -replace finger tips :D

Thanks!
I don't like a long stick, but it is necessary :). very danger machine.

I don't like shortened fingers :D

Linear Guideway
 

Hi Vladimir,
I'm curios how Linear Guideway takes the forces when you cut material like wood for example? Does those guideways resist in time and for how long ?
Because when you cut along X and Y axis there are a lot of force in order to push through material.

Thank you,
Marius

Marius, you question is about linear guide that I use in my Z axis?
My linear guide of the 20mm:
charge= dynamic capacity is 14.1 KN
charge =static capacity is 24 KN

hi all.
I would like to sharing this incredible work done by machine called mechmate .
logo mark of our workshop, this will be internal environment.
hugs

Outstanding graphic design. Very professional.

Looks Great! :)

Good to hear from you guys again! Looks great!

thanks guys, more news soon.:)

Hi Vladimir,
How is your motor and z-slide holding up? Are you still happy with the cut performance?

The cut is not as good, but for major work is acceptable.
soon we will use 3:1 reduction.
hugs

small video of that great machine in action.
http://www.kapbrasil.com/videos/artech.wmv

Thanks Gerald!

hugs.

I would like to share my last build, my cnc design
http://www.kapbrasil.com/videos/cnc3.wmv

hugs

Nicely done, thanks for sharing these great builds ;)

Our mechmate boring and cutting of aluminum plates of 20mm. these parts are used in my next CNC project.
http://www.youtube.com/watch?v=ApVzcXgF4GY&fmt=18

cara vc ta maluco mesmo! (you are crazy dude!) :)

The MM bridge can wipe you out of the table in a split second if it makes a bad move, be carefull, no jokes, be carefull you never know when something goes wrong, shit happens...

When I use my cnc mill I always use protective glasses, yeah, friends sometimes give me that look, but I only have a pair of eyes and I plan to keep them as they are right now... :)

Be safe!

Thanks Vladimir! What coolant/lubricant are you using?

(Pablo, let's not start a safety debate here)

PEU, the mechmate machine is very reliable. :)

Gerald D, I use Soluble oil, 4 flute, 6mm HSS end mill . 10.000 rpm 0,4mm depth and 1300mm/min feed rate.
the drilling was used a 3mm solid bit and 5mm deep

hugs

oops sorry... :)

hi there great job

Thanks!
I used our mechmate to drilling the steel "I" profile, it will be used in my current cnc project.
http://www.youtube.com/watch?v=TYDn7xW3l9A

here My Z axis, it has been cutting in mechmate

regards

Vladimir,

That is one large plate. What are you going to attach to it?

on "I" profile, I will fix linear guides for the X axis of my next CNC project.

I milling some 1/4 steel plate on mechmate, 26mm hole, I use it for my new CNC router project
http://www.youtube.com/watch?v=70HSeSVnd-w

Hugs

wow one stout plate!! is that 3/4"? Must be a heavy z slide.

Yes, Z plate are 3/4" .It is Very heavy.

best regards.
Vladimir

mechmate originate a monster! :)

We feed the hungry dinosaur. see the cheerful face of the victim. :)

Another mechmate job too.

Cool T-Rex. May I ask about the material (MDF I assume?) thickness? And where you got the DXF for cut file? I'd love to cut one myself for my school. Thanks

Nicely done Vladimir! :)

Thanks... i use 9mm MDF for T-REX an 3mm for human
for T -rex just increase for 9mm MDF

Regards
Vladimir

Thanks for sharing Vladimir. What size is the human and the T-Rex.

Great...one Christmas present taken care of. Thank you Vladimir.