MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Archives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Mon 15 September 2008, 00:09
jkasquires
Just call me: Jacob
 
Folsom, CA
United States of America
Quick question on MM's capabilities...

I've been lurking around for the past few weeks between here and cnczone and am wondering if someone could comment on a few things for me.

1. I am interested in using the MM for my cabinetry and desk designs. I know that it should be no problem with MM but just wanted to make sure it would handle that.

2. I would also like to machine water cooling blocks for PC's using copper plate and Delrin or Acrylic tops. The blocks can get rather intricate with the pins so I was wondering if this machine has the necessary accuracy and repeatability.

I understand that question 2 might come down to build quality, I am perfectly okay with that. I just want to know that I can do my larger projects and my smaller more detailed projects on the same machine.

Thanks again for any help! Love the sight!
  #2  
Old Mon 15 September 2008, 05:15
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
These were cut using a 4' X 8' MechMate. The tolerance between file and cut part in the alu, was about .003". Hope this helps

http://www.mechmate.com/forums/showt...&postcount=299
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:27.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.