MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > The Show Room
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 28 March 2017, 11:31
st_indigo
Just call me: Philip.X.Diaz #123
 
Los Angeles, CA
United States of America
Tilting Plywood Cart

Hey MechMateys! I made a thing, and it is glorious.

I give you the Tilting Plywood Cart! Made from 0.71 Baltic Birch (or 18mm if you prefer). Uses just over half a sheet. Four 3" swivel lock casters let you roll it any which way. 1/8x1 steel bar has a notch that locks the cart in the horizontal position, then you just pull the cord to release. The center of gravity of the sheet is over the pivot point so it won't slam down when you tilt it.

I'll type up some instructions to go along with the construction photos and plans, and post at a later date. For now, here are some photos of the completed cart.

Images Below - Admin
Reply With Quote
  #2  
Old Tue 28 March 2017, 20:21
timberlinemd
Just call me: Steve #66
 
Arizona
United States of America
I don't see the photos?
Reply With Quote
  #3  
Old Tue 28 March 2017, 20:50
st_indigo
Just call me: Philip.X.Diaz #123
 
Los Angeles, CA
United States of America
Strange.. I can see them just fine.

Is anyone else having trouble seeing the photos? If nobody but me can see them it's probably a privacy setting in google photos I need to change.
Reply With Quote
  #4  
Old Tue 28 March 2017, 20:53
digger
Just call me: Milosh #113
 
Toronto
Canada
I don't see them as well.
Reply With Quote
  #5  
Old Tue 28 March 2017, 21:04
lonestaral
Just call me: Al #114
 
Isarn
Thailand
Send a message via Skype™ to lonestaral
No. I cant see any photos.
Reply With Quote
  #6  
Old Tue 28 March 2017, 21:19
st_indigo
Just call me: Philip.X.Diaz #123
 
Los Angeles, CA
United States of America
Okay.. let's try this again with Flickr instead of Google:







Reply With Quote
  #7  
Old Tue 28 March 2017, 23:43
lonestaral
Just call me: Al #114
 
Isarn
Thailand
Send a message via Skype™ to lonestaral
Yes, that works
Reply With Quote
  #8  
Old Wed 29 March 2017, 17:43
st_indigo
Just call me: Philip.X.Diaz #123
 
Los Angeles, CA
United States of America
48x96 sheet layout for 0.70" plywood attached

pockets are milled 0.35" deep
Attached Files
File Type: pdf TILTING-PLYWOOD-CART.pdf (291.2 KB, 144 views)
Reply With Quote
  #9  
Old Wed 29 March 2017, 23:04
lonestaral
Just call me: Al #114
 
Isarn
Thailand
Send a message via Skype™ to lonestaral
Thanks for the PDF.
I will keep it for future use.
Reply With Quote
  #10  
Old Thu 27 April 2017, 23:47
IamDave
Just call me: Davey
 
Ball Ground, GA
United States of America
Excellent idea I use something similar to move extira sheets around. An old sheetrock lift I modified... Thanks
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for DXF files for Candy Cart CosmicNacho The Market Place 8 Mon 16 November 2015 14:17
19mm Plywood offcuts Kobus_Joubert The Market Place 8 Tue 29 March 2011 06:22
Plywood Wine Rack danilom The Show Room 6 Wed 23 March 2011 12:34
Scarf cutting file for plywood jehayes Miscellaneous / General / Whatever / Catchall 37 Thu 18 March 2010 08:57
Tilting or hide-away MM? limited floor space Mike94531 General - MM Build 49 Sat 13 March 2010 03:39


All times are GMT -6. The time now is 02:49.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.