MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 20. Gantry
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sun 29 March 2009, 10:33
SteveE
Just call me: Steve
 
Louisville, KY
United States of America
Y-Rail Distance

I went the aluminum rail and V Track route with my MechMate. I've finished welding up the gantry and the car. I'm in the process of mounting the aluminum/V track rails on the gantry. With the aluminum having a 1/2"(+) overhang(so I can mount the spur track under it), the distance between the V track point is roughly 21 inches. With the rollers mounted in the car using just a washer as a shim, the distance between the roller valleys is roughly 22 inches. Using washers as shims for test fit, it looks like I will need shim spacers of 5/8" to get the V bearings correctly placed over the V track. Does this sound out of the ordinary? Or could I extend the aluminum overhang of the gantry rails to more like 3/4"(+)?

Other than that, all is going well, table is almost done and electronics are on the way...

Steve
Reply With Quote
  #2  
Old Sun 29 March 2009, 14:48
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Extend the alu overhang as far as possible. (more than 3/4")

If you don't do this, the pinion gear cannot reach to the rack before it falls off the short shaft of the motor.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 15:31.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.