#1
|
|||
|
|||
Just starting, from Fairland in Johanesburg
Hi All,
I've been studying the plans and getting excited. Lost my job a week ago and now have a lot of time on my hands so here we go. Thanks to all the guys that have already given me advice. I will keep everyone updated. By the way if anyone needs a pilot let me know. Rob |
#2
|
|||
|
|||
Just shout, I am always available to show you around. Sorry to hear about the job loss.
|
#3
|
|||
|
|||
Welcome Rob!! and good luck with your build, your in good hands here, let me tell you!!
Cheers Tony. |
#4
|
|||
|
|||
Welcome Rob!
|
#5
|
|||
|
|||
Welcome Rob! Loosing the driver job could be a blessing in disguise
|
#6
|
|||
|
|||
Yeah loosing the job gives me a lot of time to do what I've been meaning to do for a long time.
Doesn't seem like anyone is flying anyway!! hehe |
#7
|
|||
|
|||
Rob ,like they say change is as good as a holiday.Gives one some other perspective on life.
|
#8
|
|||
|
|||
So true Hennie.
I must say I feel there is a huge burden that has been lifted. Like a divorce its been going on for a long time and now its final. |
#9
|
|||
|
|||
Flying, too much ash in the air.
|
#10
|
|||
|
|||
Hi Kobus,
Its been a while since I was in Brakpan. I used to fly at Brakpan and do some work on planes there. Rob |
#11
|
|||
|
|||
Can't fly there one Sunday per month then it is a proper DRAG STRIP for the local MANNE. .... those Brakpan okes with the orange on the arial....fur on the dash...square dice on the rear view mirror..and the Blue Bull balls hanging on the back of the car..
|
#12
|
|||
|
|||
Sounds like things got better since last I was there
|
#13
|
|||
|
|||
Hi All
I am still lost in this world of drawings, but I am sure I will receive the kindly support from this comunity. I will retire very soon from the "Universidad de Guadalajara" (I am in the computer sciences area) and will have the time to build my own machine. I am on my way!!!! Gretting from Mexico!!. Rafael Ceja |
#14
|
|||
|
|||
Welcome Rafael.
I've just started myself. let me know how it goes? Rob |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
starting to build this week | mrghm | Introduce yourself and start planning | 8 | Mon 06 December 2010 16:35 |
starting again after a power loss | javeria | CNC motion control software | 21 | Mon 20 July 2009 19:51 |
Starting - Perth, Australia | rhoads56 | Construction started, but not cutting yet | 10 | Sun 28 September 2008 05:13 |
Starting parts list | Arthur Ransom | Archives | 2 | Sat 20 January 2007 09:32 |