#1
|
|||
|
|||
Getting Started - Karachi Pakistan
Dear Mechmate
I regesiter today I need autocad drawing for table structure fabrication also detail list of parts, component & manufacture etc.step by step assembly details.now I am in chain so many part I can buy from here Sohail Ahmed |
#2
|
|||
|
|||
Ahmed,
The table structure is not available in autocad format. The plans are in the download section. From the plans and all the info on the forum, you must put together your own parts list for the options you want on your machine. Manufacturer info is also available in the forum threads in their respective sections. Hope this helps. |
#3
|
|||
|
|||
table material list & BOM
Kindly give me the drawing of router table .Working area 1220x2440
thanks |
#4
|
|||
|
|||
Welcome to MechMate. Here one must read, read, read and then understand how it all works and THEN build it yourself. Good luck with all the reading.
|
#5
|
|||
|
|||
Eish !
|
#6
|
|||
|
|||
How would you like your Coffee & donut with this…..
Ahmed, some may take your request a tab offensive. Read a bit more buddy, there is a download area for those plans. After downloading plans, keep on reading and reading and reading on the forum till you get it, then, you may ask for assistance …..not this ways Amicalement, Robert |
#7
|
|||
|
|||
Ditto,
|
#8
|
|||
|
|||
Nothing is handed to you. We all went through the process of downloading the plans and reading lots of builds. We will help but if you are looking for some one to build for you, not going to happen here.
|
#9
|
|||
|
|||
Dear mechmate
I still do not undersatand how I get the router table drawing & BOQ there is no link to down load . Thanks sohail Ahmed |
#10
|
|||
|
|||
LOL!!! Robert, you beat me to it!
You will still "do not understand how I get the router table drawing & BOQ " until you put in YOUR OWN EFFORTT to find it... We are very helpful but extremly stubborn bunch of people when it comes to this... (hope I speak for most of us here) BTW, check this out. If you STILL don't understand ... that means you didn't even bother to read & we will get really pissed... Last edited by KenC; Sun 11 April 2010 at 09:33.. |
#12
|
|||
|
|||
Thanks Gerald. Ahmed for sure please do tons of reading here !!!!
http://www.mechmate.com/forums/showthread.php?t=376 |
#13
|
|||
|
|||
Ahmed,
Sometimes video can clear up a lot of questions. Search MechMate at www.youtube.com Lots of talented builders have posted their machine videos there. Mach3 at www.machsupport.com is another vital portion of this project. Best of luck, DonRoss |
#14
|
|||
|
|||
-------------------------------------------------------------------------- |
#15
|
|||
|
|||
Now you are catching on. You put the effort in and when you have a problem, we will try to help you.
Good luck with your build. |
#16
|
|||
|
|||
Good stuff Sergio
|
#17
|
|||
|
|||
Did you notice the Genie is MM Blue?
|
#18
|
|||
|
|||
That genie Post is awesome! LOL. I think a lot of us here can relate to that.
|
#19
|
|||
|
|||
LOL awesome!! you gotta do the hard yards to get where you need to be!!
Cheers Tony. |
#20
|
|||
|
|||
excellent! now the forum has a "go to post" for questions like the one in the 1st post
|
#21
|
|||
|
|||
LOL! I can relate to that too!
A cartoon tells a thousand words! *ps, I pop by the download page & realized the dxf file are no longer there... Maybe we wer too hard on Ahmed... |
#22
|
|||
|
|||
I hope we have not scared Ahmed off.
|
#23
|
|||
|
|||
maybe he is refering to the fact that parts are no longer available . have to ask them to metalhead.
|
#24
|
|||
|
|||
No, that is not what he asked for....
|
#25
|
|||
|
|||
Router table Drawing any format autocad,dxf,pdf,or scan
Hi Mechmate
I am still in a problem because. I don’t gat any drawing of router table. I don’t know where get the information or drawing material BOQ. I will appreciate if any person will help me to take information Regard Sohail Ahmed Sohailkw27@gmail.com 0086-13482341781 |
#27
|
|||
|
|||
zumergido and Ken:
I think Mike mentioned once (but cannot find the thread) that if you life outside of the US you can send him a PM and he would beable to send the DXF files so the laser parts can be build locally. Mike correct me if I am wrong... |
#29
|
|||
|
|||
Dear Mechmate.
Thank you very much of Mechmate team. They open to opportunity to develop CNC Router Now I am very happy to get the PDF files now I can understand how fabricate the router table & gantry assembly the downloaded data is very useful for me. I am requesting to you please send these data in DXF format so it will be useful for me to send the file to CNC plasma machine. I hope Mechmate team will continue cooperate in future. Regard sohail Ahmed |
#30
|
|||
|
|||
I think Ahmed now has what he needs to get started on his MechMate !!! Welcome to the team !!!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Construction has started - Melbourne, AU | Besser | Construction started, but not cutting yet | 63 | Thu 10 February 2011 00:27 |
MechMate moves and spindle sings! - Cacak Serbia | milanm | Construction started, but not cutting yet | 20 | Sun 25 July 2010 14:12 |
Construction started - Laibach, Slovenia | macky | Construction started, but not cutting yet | 8 | Fri 23 April 2010 08:12 |
Construction started - Greece | foinikas | Construction started, but not cutting yet | 20 | Thu 31 December 2009 10:13 |
Help needed to make cnc router - Pakistan | Masroor Anwar | Construction started, but not cutting yet | 19 | Tue 30 January 2007 03:32 |