MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Archives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Wed 21 March 2007, 16:26
eloid
Just call me:
 
What mode are u running your motor - Unipolar Bipolar

want to build 5x10 table, with some 720 oz /motors
dont know which is the better set up?
  #2  
Old Wed 21 March 2007, 21:32
Gerald_D
Just call me:
 
Suggest you get 8-wire motors, and wire them unipolar (half-windings) for a start.
  #3  
Old Thu 22 March 2007, 18:05
eloid
Just call me:
 
CAn you explain why ...to wire them half winding?
  #4  
Old Thu 22 March 2007, 21:23
Gerald_D
Just call me:
 
See this thread: http://www.mechmate.com/Forum/messages/15/3332.html
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:01.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.