6"x96" used C channel $17.40 USD - MechMate CNC Router Forum

		MechMate CNC Router Forum > The Market Place
6"x96" used C channel $17.40 USD

Last 1 | 3 | 7 Days

Today's Posts

Fri 08 October 2010, 17:29

GC3

Just call me: Eugene Beaufort Crain III

San Jose del Cabo

Mexico

6"x96" used C channel $17.40 USD

http://www.mhedepot.com/Used_96_x_6_...eams966-cg.htm

Ran across this while surfing...too bad it is not 10' sections but maybe good for legs or a smaller machine.

GC3

Last 1 | 3 | 7 Days

Today's Posts

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Driving an "indexer" , or a ("4th") rotary axis	edrowell	Driving Mechanisms: Rack/pinion, gears, screws, belts & chains	14	Sun 28 June 2015 16:41
"Grub"/set screws for pinion gears - fitting and locking them.	J.R. Hatcher	Driving Mechanisms: Rack/pinion, gears, screws, belts & chains	23	Wed 23 June 2010 08:53
"Gecko 540" vs. "PMDX-122 & Geckos 203V"	kanankeban	701. Motor Drives	10	Thu 19 February 2009 08:19
Handmade V-Rails - "JR Skate" has 4.5" grinder riding the rail	J.R. Hatcher	Archives	93	Tue 23 October 2007 09:37
Alternative metal table - mostly from 3x1.5" channel	Loren Gameros	10. Base Table	8	Sun 10 June 2007 14:29

All times are GMT -6. The time now is 01:29.