#1
|
|||
|
|||
servo motors
Looking for a source for dc brush servo motors 800-1000 oz-in
|
#2
|
|||
|
|||
Eloid,
Those would be some might large motors. I have an MCG ID33004. That motor weighs 10.5 lb, is 7.78 inches long, and has only about 220 oz*in torque. From what I've read, servo motors are usually used with gearboxes to get the required torque at the needed speed. |
#3
|
|||
|
|||
servos
you got it. 3.6 or 7.2 I like servo cuase the quiter and torque is more linear vs rpm.
|
#4
|
|||
|
|||
This is a good servo motor price and torque.
130SJT-M075D -- 1.6KW - 7.5Nm - 2500rpm - 6.0A 410$ aprox. And this is a very good torque 130SJT-M150B --- 2.3KW - 15Nm - 1500rpm - 9.5A 500$ aprox. perfects for configure a plasma beast. Last edited by isladelobos; Mon 12 May 2008 at 09:23.. |
|
|