MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Miscellaneous hardware and software > Miscellaneous / General / Whatever / Catchall
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Thu 30 April 2015, 19:22
Mojo
Just call me: SolarImages
 
Bisbee, AZ
United States of America
Looking for some clues here..

Been quite awhile since i have visited this forum So.. "Hello all!"
Anyway kinda getting back into the cnc machine building again. This time i was given a Dynacnc Machine the company has gone out of Business so not sure this is a good thing. This machine has a 6' X travel and a 11' Y travel. It uses servo motors Iconi: 14.06 LB-IN Iconi: 7.3 amps vrated 90 VDC speed 3000 rpm.

these are driven by the gecko legacy 320 drivers (3 of them) X,Y,Z

they used Hiwinn precision bearings and X,Y use rack and pinion drives Z is a 5 start acme ballscrew.

Just looking for opinions as to where to go from here the acme screw i think needs to be replaced for a ballscrew. ( need to find a vendor) The limit switches do not work so i believe if an encoder fails it will run away without them?

So anyway good to be sorta back i know this is not a machmate but this is the only place i have ever learned anything really from building a CNC cheers all!
Reply With Quote
  #2  
Old Sun 10 May 2015, 18:39
servant74
Just call me: Jack
 
Nashville (Tennessee)
United States of America
Hi, nice to have you back, but I hate to suggest, you might check CNCZone for more appropriate response in a more timely way.

As we all know, Mike & Gerald are pretty focused on the MechMate forums being focused on MechMate.

Take care.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:41.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.