MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Computing, Software & Programming > Graphics & CAD
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Wed 19 September 2007, 01:36
grandpi
Just call me: Pierre
 
Caussens
France
Complex 3D volumes to 2D parts ready to cut. (Flatten twisted surfaces to 2D sheets)

Hi Gerald, Hi everybody,

I would like to present you this software with great abilities !!!.I was looking on the web for a software i have seen 3 years ago to unfold 3D volume (http://www.touchcad.com/). Finally, i have found a cheaper and easy to use software : http://www.laminadesign.com/

I think a good help to go ahead with Mechmate cutting...
Have a look and tell me what do you think. thanks.

Pierre.
Reply With Quote
  #2  
Old Wed 19 September 2007, 03:54
duluthboats
Just call me: Gary
 
Arlington, WA
United States of America
Very interesting I will have to play with the demo. It could be some great software.
Thank you, Pierre, for bringing this to the forum.

Gary
Reply With Quote
  #3  
Old Wed 19 September 2007, 05:29
grandpi
Just call me: Pierre
 
Caussens
France
Master software

Gary,

As you think , it is going to became a "master" software if it could accomplish correctly and easily all the functions it is made for : i'm going to use the trial tonight.

The photo-results of 3d realisations are incredibles thinking they came from flat parts materials !!!

Have you seen all the "automatic" possibilities to stick flat parts beetwen each other ???. I'm really exited by this software....

Bye, Pierre.

Last edited by grandpi; Wed 19 September 2007 at 05:34..
Reply With Quote
  #4  
Old Tue 15 July 2008, 07:10
normand blais
Just call me: Normand
 
montreal
Canada
Salut Pierre a tu fait quelques experiences avec LAMINA .Sur le site de Rhino3d il y a des (WIP) work in progress qui peuve se raprocher de LAMINA et etre tres interessant. .le lien http://en.wiki.mcneel.com/default.as...oHomeLabs.html les commande de PANNELING http://en.wiki.mcneel.com/default.as...nchor_Commands
Il y a aussi ARCHCUT
http://en.wiki.mcneel.com/default.as...l/ArchCut.html

Nouveau script pour grasshopper

http://jarek-rhinoscripts.blogspot.c...t-testing.html

Les nuit quand tu ne peut pas dormir essaie cela http://en.wiki.mcneel.com/default.as...inoScript.html Bonne lecture
Normand
Reply With Quote
  #5  
Old Fri 18 July 2008, 09:04
normand blais
Just call me: Normand
 
montreal
Canada
This is a link from Jonathan David Chertok's site , it explain strategy for new ways to work with mesh.
http://www.universaljointdesign.com/...chitecture.pdf
something in the same spirit for architectural drawing http://www.visualarq.com/ it is a beta but the video look promising.
Normand
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:56.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.