#1
|
|||
|
|||
Tool cabinet for my Mechmate.
Seems I am always running to the work bench looking for a pencil, collet wrench, router bit, etc.... So I decided I would build a little cabinet to store all the stuff I need when using my Mechmate.
The cabinet is made from .5" MDF, the drawers are white oak. The cabinet was made entirely with the MechMate, the drawers were made using conventional tools (tablesaw, plane, shaper, etc..). This was designed to fit flush with the first cross member so you don't hit your legs when working in the front of the machine. This location is very accessable when changing bits or when setting up a job. |
#2
|
|||
|
|||
With pictures this time
|
#3
|
|||
|
|||
Wayne,
Nice idea and nice work. You have inspired me. |
#4
|
|||
|
|||
Very Nice Wayne,
You can never have enough storage. |
#5
|
|||
|
|||
Nice job. Thanks for sharing this idea. How did you attach it to the cross braces?
|
#6
|
|||
|
|||
Thanks, glad you like it.
I used brackets made from 1" angle iron....simple but effective. I will take a photo tomorrow. |
#7
|
|||
|
|||
It is a nice cabinet, but it occupies space that we often use for G-clamps to hold workpieces down onto the table.
First thought that you could set the cabinet further back so that the clamps can work in front of it, but then realised that the long end of the clamp hangs down and would obstruct the drawers. Still is a nice cabinet though, just needs a good location . . . . |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MechMate Laser Kit Parts in the UK | cncbasher | The Market Place | 15 | Sun 16 November 2014 07:21 |
Progress on my Lathe project #23 - Plettenberg Bay, S.Africa | hennie | MechMates already cutting | 667 | Mon 23 December 2013 22:08 |
Great computer shop cabinet - "Mobile Security Lcd Computer Cabinet Blue" | WTI | 80. Computer Hardware & Software | 5 | Thu 29 July 2010 03:33 |
Integrated PC & Control Cabinet - Wilmington NC | cbboatworks | Construction started, but not cutting yet | 51 | Sun 05 April 2009 16:19 |