MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > The Show Room
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sun 05 April 2009, 10:03
Rad Racer
Just call me: Wayne #25
 
Minnesota
United States of America
3D carving - test

With nothing left to do on the machine I decided I should probably start using it and test the capabilities.

This is my first 3D carving on this machine. It was a free sample downloaded from www.vectorart3d.com. I also used their (free) milling program to generate the g-code required to cut this sample.

The sample was rough cut with a 3/16" endmill, and finish cut with a 1/8" ballmill. Total cut time was about 15mins.
Attached Images
File Type: jpg DSCN4100.JPG (92.3 KB, 744 views)
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:54.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.