MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 10. Base Table
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 16 June 2009, 14:12
lumberjack_jeff
Just call me: Jeff #31
 
Montesano, WA
United States of America
gauge bar suggestion

10 20 235 shows the clamp strips cut at "Y+450mm".

10 10 300 shows a gauge rod cut at "Y+461mm".

Seems to me that the clamp strips, if cut 11mm longer, would work nicely as gauge rods.
Reply With Quote
  #2  
Old Tue 16 June 2009, 21:01
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Good thinking.
Reply With Quote
  #3  
Old Wed 17 June 2009, 05:34
Robert M
Just call me: Robert
 
Lac-Brome, Qc
Canada
Send a message via Yahoo to Robert M Send a message via Skype™ to Robert M
Thanks for the tip...thanks for sharing
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:03.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.