![]() |
#1
|
|||
|
|||
Making dinosaurs - Curitiba, PR, Brazil
Hello! I would like to sharing of the MM build.
I started with Z axis. Congratulation Gerald, for sharing this great project. |
#2
|
|||
|
|||
Welcome Vladimir,
My Z axis doesn't look anything like that ![]() I look forward to seeing the rest of your build. Jayson. |
#3
|
|||
|
|||
yes, I make a little modification on Z axis
![]() More pics. Travel . http://www.kapbrasil.com/videos/bisel.wmv Grinding http://www.kapbrasil.com/videos/mechmatex.wmv |
#4
|
|||
|
|||
yes, I make a little modification on Z axis
![]() More pics. |
#5
|
|||
|
|||
Great progress guys! Looking good!
|
#6
|
|||
|
|||
Good going there...I like the picture in post#4...on the pants the words FATAL....the person welding with bare feet....now THAT is maybe not fatal, but could be painful sometimes...
![]() Are you sure you have enough space for the machine next to the house....when you have 2 x X-axis steppers hanging on there will it fit ? |
#7
|
|||
|
|||
Quote:
![]() Hi, My foot have a carapace that protect it. ![]() The space is just enough for the MM. mores pics. |
#8
|
|||
|
|||
Vladimir,
I like your Mill opereator. She looks like a good worker. She needs a stool so she can easily work on the Mill. I thought I didn't have much space. Can you move around on each side with the motors on? |
#9
|
|||
|
|||
Quote:
![]() The place is just for make test, betimes move to another place. hugs |
#10
|
|||
|
|||
That is a funny looking spindle....to me it looks like a normal electrical motor with a collet? What make is that and how much did it cost ?
|
#11
|
|||
|
|||
Did the Little lathe operator made your wheels ?
|
#12
|
|||
|
|||
Vladimir, your pictures are a lot of help - especially the detailed washer assy pics, G' we need to have a construction gallery with subtopics covering the pictures of individual assemblies.
no no I don't volunteer to do it ![]() RGDS IRfan |
#13
|
|||
|
|||
Hi all, yes, this is a normal electrical motor, the price was $ 115
Valdir |
#14
|
|||
|
|||
Are you going to run it at normal speed, or are you going to push its speed up with a Variable Frequency Drive?
|
#15
|
|||
|
|||
Quote:
the cost here, about 210.00 USD hugs. |
#16
|
|||
|
|||
That is very interesting! Have you guys tried this before? What about the bearings? Can the rotor survive the centrifugal force? (Podemos sobreviver o rotor da força centrífuga?)
|
#17
|
|||
|
|||
I will also following this NEW Spindle closely...did you have to modify it to take the collet or did it come like that ?
|
#18
|
|||
|
|||
Kobus, a "spindle" is no more than a standard 3-phase motor with better bearings and a smaller diameter (longer length) rotor to stop it from flying apart at high speed.
|
#19
|
|||
|
|||
Quote:
it is a Siemens standard 3-phase motor 1HP 3420 rpm. the 1/2 HP "spindle" in action. http://www.kapbrasil.com/mancal.wmv http://www.kapbrasil.com/poli.wmv http://www.youtube.com/watch?v=M4oUZ3V7s8o best regards |
#20
|
|||
|
|||
hmmmm interesting!
RGDS Irfan |
#21
|
|||
|
|||
Quote:
see pics and works made by router, using the 1/2 HP "homemade spindle" http://www.youtube.com/watch?v=BUDsSEEgxJI thanks |
#22
|
|||
|
|||
Vladimir - can you post the g code file (for Mach) for the above - or share the dxf file plz, my kid would love that insect.
RGDS Irfan |
#23
|
|||
|
|||
ok...the file
|
#24
|
|||
|
|||
Vladimir thank U
|
#25
|
|||
|
|||
Thanks for the info Vladimir...looks like you are an old hand at this CNC thing.
Two more things.. 1..did you put thread on the motor shaft ? or how did you fix your chuck ? 2.. How many millimeters / inches is that motor in diameter ? Looked at your movie...what a sweet sound. |
#26
|
|||
|
|||
Quote:
the motor shaft has a M5 hole, Put a screw inwards of chuck. the diameter this motor is about 135mm. thanks |
#27
|
|||
|
|||
Quote:
Can you give a plan for the Z axis ? Or a list with material you used to build the Z axis ? Thank you, Marius |
#28
|
|||
|
|||
|
#29
|
|||
|
|||
Nice video, thanks
![]() Well done Valdir and Vladimir (and daughter)! Can you please us more about the control box? |
#30
|
|||
|
|||
Quote:
courtesy of the Dimetal.MC Thank you Gerald. Vladimir Last edited by jvfc; Sat 24 January 2009 at 21:58.. |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
New MechMate painted, with experimental control box - Atibaia, Brazil | zetacnc | MechMates already cutting | 48 | Tue 13 July 2010 00:37 |
Hello From Sao Paulo, Brazil! | luizfrds | Introduce yourself and start planning | 13 | Tue 30 June 2009 16:21 |
Making a wish list | Medemt | 70. Control Systems | 1 | Wed 25 March 2009 18:22 |
Mechmate for guitar making? | rhoads56 | General - MM Build | 7 | Tue 19 February 2008 12:03 |
Many steel parts cut - Curitiba (PR), Brazil | ldorta | Construction started, but not cutting yet | 20 | Thu 01 November 2007 01:13 |