MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > Troubleshooting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #31  
Old Fri 10 July 2009, 13:02
Conrado_Navarro
Just call me: CONRADO NAVARRO #55
 
OBREGON
Mexico
Send a message via MSN to Conrado_Navarro Send a message via Yahoo to Conrado_Navarro
they are like figure 1, but J1 is at the botom two
Reply With Quote
  #32  
Old Fri 10 July 2009, 13:09
Conrado_Navarro
Just call me: CONRADO NAVARRO #55
 
OBREGON
Mexico
Send a message via MSN to Conrado_Navarro Send a message via Yahoo to Conrado_Navarro
Gerald

Now they are,
Reply With Quote
  #33  
Old Fri 10 July 2009, 13:16
Conrado_Navarro
Just call me: CONRADO NAVARRO #55
 
OBREGON
Mexico
Send a message via MSN to Conrado_Navarro Send a message via Yahoo to Conrado_Navarro
Talking Motors Turnnnns!!

Gerald.:
and commpany.

Congratulations....We did it!!!!!!!!!!!
Motors turnnn smoothly.

Error due to bad charge pump configuration!!

Thanksssssss!!!
everyone is invited to celebration!!!!
Reply With Quote
  #34  
Old Fri 10 July 2009, 13:42
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
If you read my post #21, you could have saved 15 hours . . .
Reply With Quote
  #35  
Old Fri 10 July 2009, 13:54
Conrado_Navarro
Just call me: CONRADO NAVARRO #55
 
OBREGON
Mexico
Send a message via MSN to Conrado_Navarro Send a message via Yahoo to Conrado_Navarro
Gerald:
Yes I read it, but, took me 8 hrs (slepping), to get up my spirit, it was geting down.

Thanks to You, Mike and company it is a successs!!.

Now to fine tunning. and install electronics to table.

Im so happy!!!.
Reply With Quote
  #36  
Old Fri 10 July 2009, 14:32
sailfl
Just call me: Nils #12
 
Winter Park, FL
United States of America
Conrado,

Configuring Mach3 can be a pain but now that things are working besure to save the configuration file at another location so that if it gets screwed up, you have a master copy.

If you think getting the motors working is fun, wait until you start cutting some thing.

Congratulations
Reply With Quote
  #37  
Old Fri 10 July 2009, 17:21
Conrado_Navarro
Just call me: CONRADO NAVARRO #55
 
OBREGON
Mexico
Send a message via MSN to Conrado_Navarro Send a message via Yahoo to Conrado_Navarro
OK, I will back up my MACH3 configuration.
Reply With Quote
  #38  
Old Fri 10 July 2009, 22:08
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
I suggest that everybody gets more involved with their .xml file.

The default name is Mach3Mill.xml, which is really an awful name for our application. The first thing I did when receiving Conrado's file was to change that file name to Conrado_01.XML. The file names can be personalised.

(You will need to edit the desktop Mach3Mill icon to run them, but they will be visible under the standard Mach3 icon)

In this way you can keep a good setup under a name while you experiment with another setup under another name.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:11.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.