|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
This afternoon I decided to cut a decorative piece that I wanted to do for a long time. I put a piece of hardwood (Saligna) on the machine and flatten it with a 20 mm cutter...Could have done it on the thickneser, but it's more fun on old BBB.
Then fitted my 3mm ballnose and 25 minutes later finished the 'CARVING'. I then ran it agains a brass wire brush to get some of the soft wood out. This give the piece more DEPTH. Some dark brown shoe polish, then some black shoe polish and I am very happy with the result. Size is 400 mm x 100 mm. |
#2
|
|||
|
|||
Maar ons speel lekker!
|
#3
|
|||
|
|||
Kobus,
Now thats the kind of stuff a router should be doing. Very nice man. |
#4
|
|||
|
|||
Kobus,
Why don't you run a 1/4 end mill before the ballnose to help take care of the bulk of the material? |
#5
|
|||
|
|||
Nice job Kobus. Looks great!
|
#6
|
|||
|
|||
Kobus,
Very Well Done. What is that wood like to work with? Is it comparable to any hardwoods we have in North America? I am sure you guys have access to some of what we would call exotic woods. |
#8
|
|||
|
|||
Gerald / Kobus
Do you guys also have access to woods like Oak, Maple, Ash , Elm, Birch or pine or spruce that we are familiar in Canada? |
#9
|
|||
|
|||
Hi Heath, I have a very nice , but expensive shop in Germiston that sells any kind of wood you can think off, BUT at a price. Old Mr Hoffmann is about 80 years old, but man does he have nice wood.
This Saligna is not a very good hardwood...a bit grainy, but I have some that I picked up in Sabie where my other house is. When I stayed there I had a local tree feller that I went out with. He had an Alaskan that fitted on a chainsaw and we made some oak and blackwood slabs that I make couter tops from. The Oak that we have tends to MOVE a lot. |
#10
|
|||
|
|||
Nils on the 6mm cutter to remove the bulk. I have Vectric Cut2D, but I don't think it can be done on this program. Aspire can I think. I tried it this afternoon, but when I put the 3mm ballnose in, it followed the exact same path as the 6mm end-mill. Maybe I don't know how to work Cut2D and if somebody else has it, please tell me how I can use a bigger cutter to do a rough cut and then use my small ballnose.
|
#11
|
|||
|
|||
Heath, pine we have lots off, it is our most common lumber, grown locally. Our next most popular wood, generally sold at all hardware shops is meranti, imported from Asia. Any other wood comes from speciality outlets - at a price.
|
#12
|
|||
|
|||
Dear Kobus give some time to finish the MM and after that I'll jump in cad files to finish one by one the drawings. It's not a big deal working with CAD software but it takes some time to catch the basics. For example I learn to use AutoCad only to fix a file like the one I send to you because this software is very handy at this job. If you try more with AutoCad of course I need minimum 2 years of training. The ideea is to create a section on this forum with DXF files for MM builders. Me for example I'm ready to work with Rhino or with Vetric because both softwares works very well with AutoCad files.
On YouTube I found many tutorials who welped me a lot . |
#13
|
|||
|
|||
Heath
All the Oak, Maple, Ash, Beech etc (Hardwoods) come from either America or Europe at extremely exorbitant prices (Had to get some cherry recently - R30 000 per cubic meter - =$ 2860) Pine is grown locally at reasonable prices but the quality is getting worse every year. African hardwoods come from further north but also at very high pricing. There are not many suppliers of "exotics" so they have a captive market. Your exotics are just as exotic for us. |
#14
|
|||
|
|||
$2860 for a cubic meter I have a cherry tree in the front yard I would sell you the whole tree for that price, getting it through customs may be tricky though
|
#15
|
|||
|
|||
Kobus,
I don't have cut2D but I would think that you should be able to have two cut files, 1) for the 1/4 endmill that does the rough cut and the 2nd for the 1/8 end mill. Try seeing if that helps. I know you can do it in Aspire and I would think you can do it in Cut2D. |
#16
|
|||
|
|||
Julle moet lekker speel . Hier in Australia hoor jy nie "lekker" so baie nie!!
Keep on posting! Nog n Hennie in Brisbane |
#17
|
|||
|
|||
Lekker lekker hier ou Hennie.
|
#18
|
|||
|
|||
Ons sal nooit twee stoutgat Hennies kan oorleef op hierdie forum nie! Hoop Hennie in Aus. is 'n voorbeeldinge seun!
Two Hennies will be to much! |
#19
|
|||
|
|||
Jammer om van jou >>k te hoor
|
#20
|
|||
|
|||
Amen...
|
#21
|
|||
|
|||
Dis reg ... pik op my.
|
#22
|
|||
|
|||
Sien Kobus het al klaar gebid vir genade
|
#23
|
|||
|
|||
Wat sal ek sonder julle twee doen?
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|