MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > After Building the Beast - Operating , Troubleshooting and Maintenance > Troubleshooting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 04 December 2010, 06:49
silverdog
Just call me: Sergio #70
 
Rome
Italy
Imperial vs metric ...

I'm trying some cut with my just finished MM, one of my first cut will be some plywood for my "future" boat ... the "Tini Cat" or Philip Bolger's Catboat.
This is the problem: all the mesures are in this form: 1,2,4 I understend that 1=1 feet, 2=2 inch but the third number ? it coud be 4/16 4/32 4/8 I can't understand,. Can somebody who is familiar with Imperil system explain ? on the book I have there is no reference at all (Build the instant catboat by Harold dynamite Payson"
thanks
Reply With Quote
  #2  
Old Sat 04 December 2010, 07:06
silverdog
Just call me: Sergio #70
 
Rome
Italy
this is what i'm talking about ...
Attached Images
File Type: jpg paratia.jpg (35.5 KB, 299 views)
Reply With Quote
  #3  
Old Sat 04 December 2010, 07:13
JamesJ
Just call me: Jim #104 (retired)
 
Kansas
United States of America
Sorry I don't recognize those measurements. Have you tried his forum?


http://www.instantboats.com/phpBB3/
Reply With Quote
  #4  
Old Sat 04 December 2010, 07:15
JamesJ
Just call me: Jim #104 (retired)
 
Kansas
United States of America
Maybe the Yahoo group?

http://groups.yahoo.com/group/Instantboats/
Reply With Quote
  #5  
Old Sat 04 December 2010, 09:12
KenC
Just call me: Ken
 
Klang
Malaysia
let me guess...
the 2nd figure never greater or equal to 12 & 3rd digit never greater or equal to 8...
so
1.4.2 ->1ft 4 2/8 inches?
1.1.5 -> 1ft 1 5/8 inches?
0.11.1 -> 0ft 11 1/8inches?
0.11.7 -> 0ft 11 7/8inches?

Last edited by KenC; Sat 04 December 2010 at 09:15..
Reply With Quote
  #6  
Old Sat 04 December 2010, 11:32
silverdog
Just call me: Sergio #70
 
Rome
Italy
Quote:
Originally Posted by KenC View Post
let me guess...
the 2nd figure never greater or equal to 12 & 3rd digit never greater or equal to 8...
so
1.4.2 ->1ft 4 2/8 inches?
1.1.5 -> 1ft 1 5/8 inches?
0.11.1 -> 0ft 11 1/8inches?
0.11.7 -> 0ft 11 7/8inches?
That's what I thougt (all other part of the project are never greater or equal to 8)... but I'm totally ignorant on imperial system .... so I thought I was maybe missing something ....
thanks everybody
in any case I will ask the instant boat forum, thanks James
Reply With Quote
  #7  
Old Sat 04 December 2010, 12:49
JamesJ
Just call me: Jim #104 (retired)
 
Kansas
United States of America
The forum is probably the fastest way to get an answer. My guess would be that maybe the first separator is a comma and the second separator is a period. Something like 1, 1.5 means one foot and 1.5 inches. I have never seen Imperial measurements like these.
Reply With Quote
  #8  
Old Sat 04 December 2010, 14:27
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
Sergio,
The most accurate way to ensure the proper length is actually to the conversion in the native documents. The rounding or "alternate units" out of autocad when the dimensions were created can be set to round up or round down or be the most significant digit chosen. SInce the MM was created natively in the Metric (SI) units system, it's safer to use metric if you doing a lot of calcuations then convert at the end to reduce rounding errors.

During my build, I just used the metric measurements and converted. 25.4mm = 1 inch. I work in "imperial" units and this was the most accurate for my builds. example. So, if your cutting area is 48" x 96", that would be 1219.20mm x 2438.40mm

I have built three machines to date with great success keeping it all metric until that end of each equation.
Reply With Quote
  #9  
Old Sat 04 December 2010, 14:49
silverdog
Just call me: Sergio #70
 
Rome
Italy
Sean, I understand your point, but my problem/doubt is that I can't be sure of what is written on the project. 0,3,3 can be 3 inches 3/8 can be 3.3 inches, 3 inches 3/16 ... I thought it was just a question of my ignorance on using the imperial system but it it seems that this kind of notation it's just not clear. I can't be sure nor in mm nor in inch .... so maybe the x/8 is the right thing but to be sure before cutting .... I think I have to ask in the instant boat forum. Sorry, I thought that it was something clear for an imperial born people.
thanks
Reply With Quote
  #10  
Old Sat 04 December 2010, 14:58
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
can you give me a drawing # that this occurs on? I may be able to clarify for you.
Reply With Quote
  #11  
Old Sat 04 December 2010, 15:08
Alan_c
Just call me: Alan (#11)
 
Cape Town (Western Cape)
South Africa
Send a message via Skype™ to Alan_c
Sean, Sergio is not having problems with the MechMate drawings, he is trying to build a boat with it and the dimensional notation in the book he is working from does not make sense (not that any imperial dimensions make sense! ) Look at post 1 & 2 above.
Reply With Quote
  #12  
Old Sat 04 December 2010, 15:22
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
oh...thanks Alan. That makes a bit more sense.
Reply With Quote
  #13  
Old Sat 04 December 2010, 15:28
silverdog
Just call me: Sergio #70
 
Rome
Italy
Ok, I had an answer !
for example: 0,8,2+ means: 0 feet,8 inches, 2/8 inch and + is 1/16 of inch .....
I'm very happy to live in a mm country !!
Ciao
Reply With Quote
  #14  
Old Sat 04 December 2010, 22:39
lumberjack_jeff
Just call me: Jeff #31
 
Montesano, WA
United States of America
You've found the right answer.

Boat offsets ("dimensions") are given as Feet, Inches, Eighths.

So 3-2-1 means 3'-2 1/8"

This isn't really an artifact of imperial dimensioning as it is a peculiarity of boatbuilding. Boatbuilders are the only ones who use this weird notation.
Reply With Quote
  #15  
Old Sun 05 December 2010, 08:21
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
...Or theatrical lighting! A par 64 is 64 - 8ths in diameter (or 8 inches) I really should have picked up on the notation shorthand. Boatswains and Theater riggers came from the same place. Brad, your usually quick on this.....

Glad you got your resolution.

Sean

Last edited by smreish; Sun 05 December 2010 at 08:23..
Reply With Quote
  #16  
Old Mon 06 December 2010, 06:28
chrisd7306
Just call me: Chris
 
Melbourne
Australia
Standard dimensions for large boats are given in feet-inches-eights and sometimes a + or - (+ means add 1/16 or - means subtract 1/16).
For canoes and small boats, the dimensions can be feet-inches-sixteenths and the same + or - but this time 1/32. It depends on the designer and how accurate he wants to be. If the third value is larger than 7 ie 8 to 15, the last value will be in sixteenths eg 1 2 8- is 1 foot + 2 ins + 8/16 - 1/32 = 1 foot 2 15/32 ins.

The designer should give the information on which system is being used.

Metric is so much easier!!
Reply With Quote
  #17  
Old Mon 06 December 2010, 07:18
silverdog
Just call me: Sergio #70
 
Rome
Italy
Thanks to all !! Now everybody on the forum knows something more (starting from myself :-) ).
Reply With Quote
  #18  
Old Mon 25 July 2011, 10:10
isladelobos
Just call me: Ros
 
Canary Islands
Spain
Send a message via MSN to isladelobos Send a message via Yahoo to isladelobos
imperial vs metric

Vídeo
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rack Metric Size 1.5 liaoh75 Driving Mechanisms: Rack/pinion, gears, screws, belts & chains 26 Sun 27 February 2011 03:39
Fastners Metric or Standard does it matter chris saintdenis General - MM Build 25 Fri 07 January 2011 17:16
Metric versus Inches Gerald D Miscellaneous / General / Whatever / Catchall 23 Wed 07 April 2010 19:16
Metric to Imperial Conversion Site jehayes Golden Resources 2 Thu 09 July 2009 20:22
Metric vs. Imperial plate thickness domino11 Profiled (laser cut) & bent steel plate 8 Thu 04 October 2007 20:49


All times are GMT -6. The time now is 00:00.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.