MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > MechMates already cutting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 12 April 2021, 11:16
oddname
Just call me: frallan #57
 
skane
Sweden
#57 and future plans.

#57 here. Finished my machine in April 2010 and its been serving me well.
But after many programs and project Ive finally come to the conclusion that my
2750x1630mm will be cut down to maybe tops 1500x1630.

Never really used full area and I would like to fit more items on the same space. Plus im giving it a table conversion to be able to use coolant without having to replace spoilbords everyt so often.


Idea is to add a new pair of legs aprox where the cut will be, then just cut it down and dragging the scrap out cut down into smaller pieces. the rest of the machine will self-support due to having the new leg added.


So in short, shorten the machine. Anyone have a similar rebuild to share, pictures etc?
Reply With Quote
  #2  
Old Wed 28 April 2021, 06:34
isladelobos
Just call me: Ros
 
Canary Islands
Spain
Send a message via MSN to isladelobos Send a message via Yahoo to isladelobos
Hi.

You can use the mid table for wood and the another mid table for plasma cutter.
A head conversion is needed but nothin complicated.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Olivier Verdier, future CNC builder in France Oliver Verdier Introduce yourself and start planning 1 Sat 05 January 2019 15:01
hello, a future mechmate in france (tarn) athanase81 Introduce yourself and start planning 8 Wed 03 July 2013 12:43
Hello, A mechmate future TUNISIA Hedi Shaba Introduce yourself and start planning 9 Fri 04 June 2010 04:49
Dreaming a future mechmate isladelobos Miscellaneous / General / Whatever / Catchall 6 Sat 20 December 2008 05:34
The hardware interface between PC and motor drives - the future beyond parallel BOB? Gerald D 70. Control Systems 16 Mon 10 December 2007 11:09


All times are GMT -6. The time now is 22:01.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.