#1351
|
|||
|
|||
Hennie will know what this is :
DSC01790.JPG DSC01791.JPG Vectric people will know this : DSC01793.JPG DSC01794.JPG The Dutch will know this : DSC01799.JPG |
#1352
|
|||
|
|||
Ooooohhhh Nice box!
Im sure that will get you some brownie points with the wife! |
#1353
|
|||
|
|||
Kobus do they fit together.I am waiting for a reply from the bearing man for the costing of 2 of them 6060 and a 12090 all 16 mm rails.
|
#1354
|
|||
|
|||
Kobus, are those for A-axis fixture?
|
#1355
|
|||
|
|||
Hennie, will cut the rest tonight and try and put it together.
Ken: No, new project for small CNC....experimenting |
#1356
|
|||
|
|||
That is cool, my I participate?
|
#1357
|
|||
|
|||
Hennie will sell you the plans when it is tested and working.
|
#1358
|
|||
|
|||
No problem with that. |
#1359
|
|||
|
|||
Ken Board and food when we visit Malaysia would be good fo payment
|
#1360
|
|||
|
|||
Wow! Consider that a done deal!
|
#1361
|
|||
|
|||
Ken, take them for a "steamboat"
|
#1362
|
|||
|
|||
Sure! & Bah Kut Teh.
|
#1363
|
|||
|
|||
Hennie & Kobus love their red meat - they will enjoy Satays....about 20 each!
|
#1364
|
|||
|
|||
It is time to speak our Language please.
|
#1365
|
|||
|
|||
#1366
|
|||
|
|||
I might go for the Steamboat...looks like FOOD.
When we lived in Holland we were introduced to Satay...not enough meat for us red meat lovers. Definetly not Bah Kut Teh.... I am NOT SICK and don't eat soup. |
#1367
|
|||
|
|||
Kobus, as a fellow meat lover, I can recommend Bah Kut Teh, provided it is served in Klang and your host is Ken. Nice stuff.
There is a restaurant in Benoni called Lemon Grass, they serve Malay food, including satay, great stuff! |
#1368
|
|||
|
|||
[QUOTE=Kobus_Joubert;50753. . .
I was very worried that I would also have sporadic movement on my MM when I go the spindle route. I connected the unit on Saturday and the machine has been running non stop without any problems. I did not add filters, special wiring and earthing to my setup.[/QUOTE] if i may ask, what wire did you use for your VFD to spindle? i guess while i'm asking - would you describe how your quick mount plate works cheers, robin |
#1369
|
|||
|
|||
Hi Robin,
When I started my MechMate I thought this thing is pulling MAJOR Amp's so I bought a 100m roll of 2.5mm 4 core CABTYRE 4core.jpg I used this to my steppers and also to run my router back then. All I did with the Spindle is to use 3 of the 4 cores from VFD to Spindle. No earthing NOTHING. The quick release bracket was in the plans I think. All it is is a small plate with 2 indexing pins and a 8mm threaded hole. This plate then fit onto your Z-Plate...the 2 pins locate into holes on Z-Plate and one 8mm bolt goes from the back of the Z-plate (rectangular tube) into the mounting plate. All you have to do is to undo the 8mm bolt and the spindle pops free. See my build log http://www.mechmate.com/forums/showt...&postcount=162 |
#1370
|
|||
|
|||
|
#1371
|
|||
|
|||
Wielle met `n P!!!.Nou net vir my Magic met die stain.
|
#1372
|
|||
|
|||
Nice acanthus leaves . Been reading a lot about those in metal work lately.
|
#1373
|
|||
|
|||
Oh is that what it is called? Got the STL files FREE with Aspire 2.5 when I bought the program.
|
#1374
|
|||
|
|||
http://en.wikipedia.org/wiki/Acanthus_(ornament)
This form of leaf motif has been in design for thousands of years. I am reading a book that goes into detail about the different styles and changes this plant leaf has gone through over the years. Cool stuff really. If history were taught this way more people would be interested for sure !!! |
#1375
|
|||
|
|||
Just did a MAD thing and registered for the 2011 Vectric User Group Meeting in Las Vegas.
Any suggestions on what to do there....I am married... |
#1376
|
|||
|
|||
Kobus,
What happens in Vegas stays in Vegas. |
#1377
|
|||
|
|||
Get married...again...by Elvis
|
#1378
|
|||
|
|||
I will have to get married to Elvis as I plan to go alone.
Maybe I can get a SA buddy to go with. That worries me Heath....I hope EVERYTHING stay's in Vegas. |
#1379
|
|||
|
|||
what did you do to get your wife to let you go alone
|
#1380
|
|||
|
|||
Kobus,
You should get her to come with you. There is lots for her to do during the day while you are at the User Group meeting. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
#11 Has died a fiery death– Cape Town (S. Africa) | Alan_c | MechMates already cutting | 556 | Tue 10 August 2021 21:54 |
Tables of all kinds | Kobus_Joubert | The Show Room | 17 | Fri 04 May 2012 08:33 |
On to parts Ordering - Matthews NC USA | qroger | Construction started, but not cutting yet | 51 | Mon 11 October 2010 05:07 |
One system controlling two tables? | Mountaincraft | 701. Motor Drives | 4 | Fri 10 September 2010 18:27 |
Ordering parts: Marysville, CA-USA | MachineMonkey | Construction started, but not cutting yet | 7 | Fri 13 March 2009 18:45 |