|
|
|||||||
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
|
#1
Sat 28 November 2009, 06:15
|
|||
|
|||
|
Belt reduction box build T5 16 to 60
Hi all ...
Herewith some pics of my reduction box build. I'm using 10mm polycarb (it was lying around in my workshop) and trying to create as much of it with the mechmate as possible. Last edited by linus1; Sat 28 November 2009 at 06:19.. Reason: more pics 
|
|
#2
Sat 28 November 2009, 09:14
|
|||
|
|||
|
Nice... and big!
|
|
#3
Sat 24 July 2010, 18:18
|
|||
|
|||
|
hii
Quote:
Kind Regards
|
|
#4
Sun 25 July 2010, 09:26
|
|||
|
|||
|
I made the polycarb pieces on the MEchmate (some 10mm stock) ... the bearing housings were a pretty good squeeze fit and then I secured them with loctite...
The standoffs I got from the local hardware store (6mm metric threaded, 30mm long hex bars) The countersink work I performed on my drill press ... So far (6 months or so) the gearboxes are working beautifully ... One thing I did extra, is I drilled holes above the base plate fasteners to be able to access the nuts through the gearbox housing.... makes things quicker ... Pulleys: http://www.cncdirect.co.za/ - extremely good service form Greg. belts: http://www.cobrel.co.za/ Regards Linus Last edited by linus1; Sun 25 July 2010 at 09:29..
|
|
| Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Reduction Drive by belt - a collection of various designs and how to build your own. | Mike Richards | Driving Mechanisms: Rack/pinion, gears, screws, belts & chains | 449 | Sat 09 March 2019 18:32 |
| Added belt transmissions #16 - Demotte, IN | myozman | MechMates already cutting | 62 | Tue 12 January 2010 05:46 |
| Belt reduction installed, cutting metals - Big Lake, MN | chopper | MechMates already cutting | 61 | Tue 24 November 2009 00:02 |
| Has dust foot, belt reduction and plastic wheels #22 - Midrand, S. Africa | MariusL | MechMates already cutting | 124 | Fri 23 October 2009 04:33 |
| Trying smaller motors with belt reduction #17 - Sao Caetano do Sul, SP, Brasil | YRD | MechMates already cutting | 178 | Sat 04 July 2009 09:59 |
