MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 40. Z-Slide
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 26 July 2008, 12:03
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Tip: Mark the eccentric bushings . . . .

I mark the eccentric bushings to show the "thickest" part:


Then there is no guessing which way the roller is going to move when the bushing is turned.

It is easier to view the bushing from the back to see the thickest part, and then mark it with a permanent marker, before cutting the notch with a thin grind disk.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 14:25.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.