MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Miscellaneous hardware and software > Golden Resources
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #91  
Old Tue 07 September 2010, 05:16
PEU
Just call me: Pablo
 
Buenos Aires
Argentina
nice!

One comment, I made many experiments with this method and there is a "problem" when you do designs like the last one, wood thickness needs to be very uniform because you get either sloppy joints or parts are very difficult to insert into each other after you inserted a few.

Do you recall the ball I made? I started assembling from the center, the parts on the outside had to be hammered in place, I used just 0.2 mm over the material thickness for the slots. I tried a little more and the joints weren't as good.
Reply With Quote
  #92  
Old Tue 07 September 2010, 07:14
fabrun
Just call me: fabrice
 
france
France
good to remember pablo
the cutting file is perfect but the cnc not (i'm exagerate off course)
the man who use it have to master his cnc

finally you are most serious than a south african boy i know (we know him all), and he's mastering his mechmate for sure
Reply With Quote
  #93  
Old Fri 15 October 2010, 22:14
fabrun
Just call me: fabrice
 
france
France
now in reunion island
http://www.youtube.com/watch?v=zHrax...layer_embedded
Reply With Quote
  #94  
Old Fri 15 October 2010, 23:10
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Second time this year? Any danger to people or economy?

http://bigthink.com/ideas/24521
http://photoblog.msnbc.msn.com/_news...95725-hot-lava

Last edited by Gerald D; Fri 15 October 2010 at 23:17.. Reason: added links
Reply With Quote
  #95  
Old Fri 15 October 2010, 23:24
fabrun
Just call me: fabrice
 
france
France
no danger for people if it stay in the enclosure (and if people don't go too near the lava)
for economy, inconvenience if the lava cross the road
Reply With Quote
  #96  
Old Sat 16 October 2010, 12:03
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
Wow, I hope you stay safe.
Reply With Quote
  #97  
Old Sat 06 November 2010, 01:37
fabrun
Just call me: fabrice
 
france
France
3d round table

a round table in 3d

thickness 15mm
diameter big circle (under glasses) 1,20m
Attached Images
File Type: jpg 1.jpg (121.9 KB, 679 views)
File Type: jpg 2.jpg (128.7 KB, 676 views)
File Type: jpg 3.jpg (115.6 KB, 678 views)
Reply With Quote
  #98  
Old Sat 06 November 2010, 05:05
liaoh75
Just call me: David
 
Taibao
Taiwan
Cool table but I have a feeling dust bunnies will love to hide in the middle
Reply With Quote
  #99  
Old Sat 06 November 2010, 05:54
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
The leg should be able to store wine bottles - keep the bunnies happy..
Reply With Quote
  #100  
Old Sat 06 November 2010, 08:01
PEU
Just call me: Pablo
 
Buenos Aires
Argentina
Nice design! but I have to disagree with G. here, the kitchen is not the best place to store wine, one liter bottles of beer are OK
Reply With Quote
  #101  
Old Sat 06 November 2010, 13:13
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
No it's place for the kids to hide the cabbage that they don't want to eat.
Reply With Quote
  #102  
Old Sat 06 November 2010, 13:21
bradm
Just call me: Brad #10
 
Somerville(MA)
United States of America
Kobus, what are my children doing in your house?
Reply With Quote
  #103  
Old Tue 23 November 2010, 07:26
fabrun
Just call me: fabrice
 
france
France
hi everyone
new design
Attached Images
File Type: jpg untitled.1431.jpg (39.8 KB, 532 views)
File Type: jpg untitled.1432.jpg (44.0 KB, 530 views)
File Type: jpg untitled.1433.jpg (47.9 KB, 530 views)
Reply With Quote
  #104  
Old Sun 05 December 2010, 06:13
fanefane
Just call me: Stefan #73
 
Baia Mare
Romania
Hi there! You're models are awesome! How do you slice the objects? With a certain function or a plugin? I tried with Split ( from Features in the Insert menu), but haven't received exactly what i wanted - those sliceforms.
Reply With Quote
  #105  
Old Sun 05 December 2010, 06:18
fabrun
Just call me: fabrice
 
france
France
thanks
i post a tutorial here: http://www.mechmate.com/forums/attac...9&d=1267851455
Reply With Quote
  #106  
Old Sun 05 December 2010, 06:20
fanefane
Just call me: Stefan #73
 
Baia Mare
Romania
Thanks a lot Fabrice!
Reply With Quote
  #107  
Old Mon 06 December 2010, 08:37
fanefane
Just call me: Stefan #73
 
Baia Mare
Romania
Sorry for the double post. Could you also recommend a manual or something for a begginer in SW to start with?
Reply With Quote
  #108  
Old Mon 06 December 2010, 10:29
fabrun
Just call me: fabrice
 
france
France
to start with solidworks, nothing better than the tutorial included (very complete, it remind me that i must read it whole) and then you can ask me by pm or email
Reply With Quote
  #109  
Old Mon 13 December 2010, 08:07
fabrun
Just call me: fabrice
 
france
France
hi everyone
dollhouse added
Attached Images
File Type: jpg 1.jpg (127.6 KB, 634 views)
File Type: jpg 2.jpg (100.9 KB, 636 views)
File Type: jpg 7.jpg (100.9 KB, 636 views)
Reply With Quote
  #110  
Old Thu 20 January 2011, 10:43
fabrun
Just call me: fabrice
 
france
France
3dtable and long chair

hi everyone
happy new year (never too late!)

let's start this year with two new design
Attached Images
File Type: jpg 3.jpg (118.2 KB, 629 views)
File Type: jpg 1.jpg (95.2 KB, 627 views)
Reply With Quote
  #111  
Old Thu 20 January 2011, 11:41
PEU
Just call me: Pablo
 
Buenos Aires
Argentina
beautiful, I do like the chair a lot!
Reply With Quote
  #112  
Old Thu 20 January 2011, 11:46
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
I like the chair...feeling sleepy now..
Reply With Quote
  #113  
Old Sun 23 January 2011, 08:42
fabrun
Just call me: fabrice
 
france
France
thanks guys
Reply With Quote
  #114  
Old Sun 17 April 2011, 08:37
fabrun
Just call me: fabrice
 
france
France
3d formula one

hi every one
here is my new design

fabrice
Attached Images
File Type: jpg 1_resize.JPG (41.8 KB, 583 views)
File Type: jpg 2_resize.JPG (35.0 KB, 586 views)
Reply With Quote
  #115  
Old Sun 17 April 2011, 09:26
Robert M
Just call me: Robert
 
Lac-Brome, Qc
Canada
Send a message via Yahoo to Robert M Send a message via Skype™ to Robert M
Again Fabrice….you strike again….a nice piece of work mate !!
Hope you can sell a few…Heuhummm…..Zillions of these
Amicalement, Robert
Reply With Quote
  #116  
Old Sun 17 April 2011, 22:04
hennie
Just call me: Hennie #23
 
Roodepoort JHB
South Africa
nice!!
Reply With Quote
  #117  
Old Tue 03 May 2011, 09:49
fabrun
Just call me: fabrice
 
france
France
3d rocking chopper

hi everyone
last project

fabrice
Attached Images
File Type: jpg 1.JPG (42.7 KB, 724 views)
File Type: jpg 2.JPG (44.2 KB, 725 views)
Reply With Quote
  #118  
Old Tue 03 May 2011, 11:31
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
That is very very nice.
Reply With Quote
  #119  
Old Tue 03 May 2011, 12:16
revved_up
Just call me: Craig
 
Hartland, MI
United States of America
that looks cooler than my real bike
Reply With Quote
  #120  
Old Tue 03 May 2011, 16:45
aussie_mick
Just call me: Mick
 
Nowra
Australia
Fabrice

Very nice. Is it designed in solidworks or what program are you using.

Wouldn't mind making one myself for my youngest son.

Michael
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
3d models for cnc artline3d The Market Place 4 Sat 15 December 2012 23:32
Flat Plate fabricated slide Gerald_D 40. Z-Slide 120 Sat 30 June 2012 08:12
GYRO, cnc flat pack components green house pierrearchi The Show Room 2 Wed 23 March 2011 12:38
3D CAD models of MechMate - SketchUp, SolidWorks, etc. Alan Conolly General - MM Build 57 Sat 01 January 2011 17:41
3d models of fish normand blais Golden Resources 0 Thu 11 December 2008 07:43


All times are GMT -6. The time now is 00:56.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.