MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 55. Dust Management
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 12 August 2008, 05:26
sprayhead
Just call me: Francis
 
sydney
Australia
Does dust get stuck in V-Rollers or on the rails?

Anyone has had problems with lots of dust on the wheels/tracks?

Or, does the Dualvee system really doesn't mind dust?

thanks,
Francis
Reply With Quote
  #2  
Old Tue 12 August 2008, 06:45
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Some plastics (making static electricity?) do sometimes attach themselves to the rails and form a thin "crust", maybe 0.5mm [0.020"] thick, but it flakes off before it gets any thicker. Never had to stop a job because the rails needed cleaning. Have however had a buildup in the z-rack while cutting a "sticky" plastic and not having any dust extraction at that time.
Reply With Quote
  #3  
Old Tue 12 August 2008, 11:03
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
I have eliminated most of the sticky plastic issues with Table Saw "slick surface" coating. It's called DRY COAT and has been great in helping keep the track "self clearing".
Otherwise...no issues - Like designed
Reply With Quote
  #4  
Old Tue 12 August 2008, 17:55
sprayhead
Just call me: Francis
 
sydney
Australia
Maybe if one polishes the V rails it might help as well to minimize built up?

Also I think that for one wanting to use felt wipers or something of the kind, you would need to polish the tracks or at least take off the "big" scratch marks that the grinding disk leaves. "Fresh rails" are probably too abrasive for felt wipers.
Reply With Quote
  #5  
Old Tue 12 August 2008, 20:57
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Sure, the smoother the rail, the less chance of that thin crust forming.

When the grind disk is set down "flat" (touching the big wide face) it leaves a very good finish. It depends on patience.
Reply With Quote
  #6  
Old Wed 13 August 2008, 01:05
sprayhead
Just call me: Francis
 
sydney
Australia
By set down "flat" you mean the whole diameter (or chord) of the disk touching the rail while grinding the 45deg chamfers?
Reply With Quote
  #7  
Old Wed 13 August 2008, 01:20
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
Yes
Reply With Quote
  #8  
Old Wed 13 August 2008, 04:26
J.R. Hatcher
Just call me: J.R. #4
 
Wilmington, North Carolina
United States of America
Send a message via Skype™ to J.R. Hatcher
When I ground my rails the problem I had was they became very polished before I was ready. When this happened the grinder stoped cutting away metal. I needed the "big" scratches so several times during the grinding process I dressed the wheel. The dresser needs to be the kind with the spinning washers, not the stone type , all it did was polish it more. When I had nearly finished I put one of the worn out wheels back on the grinder, readjusted the skate so the wheel made 100% contact with the rail (like Gerald said) and polished the rails to almost a mirror finish.

I think the felt wipers will be the answer to any dust buildup, although for me it is not a major problem. I currently wipe my rails down with an oily rag about once a week. The oil seems to just breakup the thin black buildup as the rollers continue to roll back and forth. My plan is to make the felt wipers in such a way as to create a guard for the rollers. I'm considering a round piece of felt with the end cut to a v then put in a small metal pipe, spring loaded to the rail with a small hole in the top for an occasional drop of oil).
Reply With Quote
  #9  
Old Thu 14 August 2008, 03:48
sprayhead
Just call me: Francis
 
sydney
Australia
J.R. your idea sounds great, and thanks for the ideas.

Gerald did an isometric sketch for a protection casing for the wheels and it had great looks plus a host of features. I did not find it though, it's somewhere in the deepness of this addictive forum. I'll find it and post it here.
Reply With Quote
  #10  
Old Thu 14 August 2008, 03:53
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
It was on the previous version of this forum:

http://www.mechmate.com/Forum/messages/2/185.html
Reply With Quote
  #11  
Old Thu 14 August 2008, 04:30
Robert M
Just call me: Robert
 
Lac-Brome, Qc
Canada
Send a message via Yahoo to Robert M Send a message via Skype™ to Robert M
By looking at the date on this previous forum, it would be right to assume either MechMate user or even some other bot users don’t really have a need for those !! ?
Reply With Quote
  #12  
Old Thu 14 August 2008, 22:44
sprayhead
Just call me: Francis
 
sydney
Australia
Robert I think that there are certain application that do call for a way to keep the rails and wheels cleaner.
Reply With Quote
  #13  
Old Fri 15 August 2008, 04:44
Robert M
Just call me: Robert
 
Lac-Brome, Qc
Canada
Send a message via Yahoo to Robert M Send a message via Skype™ to Robert M
I agree with you “sprayhead ” !!
It’s just my way of actually asking to other that may have them to report if they see a real need ?
Reply With Quote
  #14  
Old Sat 16 August 2008, 03:16
sprayhead
Just call me: Francis
 
sydney
Australia
Oh,, ok, my english is not yet as I would like it to be, sometimes this kind of stuff happens.
Yep, sprayhead is a bit "how'ya going" I agree. My real name is Francis.
Reply With Quote
  #15  
Old Mon 18 August 2008, 06:34
sprayhead
Just call me: Francis
 
sydney
Australia
Guys, does the wheels ever get clogged up? Ever had to scrape/wipe the wheels?

thanks
Reply With Quote
  #16  
Old Mon 18 August 2008, 22:21
Kobus_Joubert
Just call me: Kobus #6
 
Riversdale Western Cape
South Africa
Send a message via Yahoo to Kobus_Joubert Send a message via Skype™ to Kobus_Joubert
So far no problem, even before I had dust extraction it stayed clean.
Reply With Quote
  #17  
Old Tue 19 August 2008, 06:20
Greg J
Just call me: Greg #13
 
Hagerman, New Mexico
United States of America
No problems here.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:53.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.