MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Structure & Mechanics > 20. Gantry
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Tue 09 November 2010, 04:22
JonnyRizla
Just call me: Jonny
 
Cape Town
South Africa
Getting the Rails

I was wondering if anyone has found any good pre-made rails, or a clever way to get them made around SA? I'd rather not angle grind myself them if there is another way.
Reply With Quote
  #2  
Old Tue 09 November 2010, 07:01
smreish
Just call me: Sean - #5, 28, 58 and others
 
Orlando, Florida
United States of America
Jonny,
I believe that Gerald had is rails professionally ground by a local vendor.
You may want to contact Sean @ CamCraft for details.

Sean
Reply With Quote
  #3  
Old Tue 09 November 2010, 08:24
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
We used http://www.roemers.co.za/ but they did us a favour in exchange for some stuff I supplied to them. I don't think they will normally take on a job like this.
Reply With Quote
  #4  
Old Wed 10 November 2010, 00:02
JonnyRizla
Just call me: Jonny
 
Cape Town
South Africa
Thanks guys, I will try my luck at Roemers, and take it from there...
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Handmade V-Rails using a baby 4.5" angle grinder - moving rails over grinder Gerald_D Archives 23 Wed 26 September 2007 22:46


All times are GMT -6. The time now is 15:37.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.