![]() |
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
South Africa Nema 34, rack and pinions and bearings
Total R24000 Zar
-4 x Stepper motor Nema 34 WT86STH118-6004A 5.6A 8.7N-m(1232oz-in) 99mm -4 x Stepper motor driver DQ860MA 7.8A 80V 256 micro-steps -4 x Power supply : 350W 60V -1 x Pc breakout board and cable + Extra set -16 x W3X bearings -4 x 2m module1 racks -4 x Module1 22 teeth pinions Contact me for more information or if you need more specifications or wiring diagrams? Please note this is the last set, so first come first serve. Kind Regards Leonard v.d. Merwe 072 779 7237 info@cherryweb.co.za ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#2
|
|||
|
|||
Some more information:
Stepper Motor Specifications: Step Accuracy = ±5% Temperature Rise = 80°C Max Ambient temperature Range = -20°C—+50° Insulation Resistance = 100MΩMin.500VC DC Dielectric Strength = 500V AC 1 minute Step Angle 1.8° Rate Voltage 3.08V Rate Current 5.6A Phase Resistance 0.55Ω Phase Inductance 5.5 mH Holding Torque 1232 (OZ-IN) Stepper Motor Driver: High performance Average current control, 2-phase sinusoidal output current drive Supply voltage from 24VDC to 80VDC Opto-isolated signal I/O Overvoltage, under voltage, overcurrent, phase short circuit protection 14 channels subdivision and automatic idle-current reduction 8 channels output phase current setting Offline command input terminal Motor torque is related to speed, but not related to step/revolution High start speed High holding torque under high speed Input Voltage 24-80 VDC Input Current < 6A Output Current 2.8A ~ 7.8A Consumption : 80W; Internal Insurance 10A Working Temprature -10~45℃ Stocking temperature -40℃~70℃ Weight 500G ![]() Last edited by iclazion; Wed 30 January 2019 at 02:56.. |
#3
|
|||
|
|||
Price from 04/02/2019 is R16000
|
#4
|
|||
|
|||
Is this still for sale?
Hi there, im also in SA, is this still for sale?
|
![]() |
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Newbie from South Africa | Anscheepers | Introduce yourself and start planning | 9 | Sun 04 March 2018 22:10 |
Hi my name is mohamed from south Africa | mohamed | Introduce yourself and start planning | 6 | Wed 25 June 2014 06:17 |
CNC IMPORT South Africa | Kobus_Joubert | The Market Place | 5 | Sun 27 June 2010 12:36 |
"High tech" Rack and pinions Nexengroup | Pierre GRAND | Archives | 12 | Fri 25 January 2008 06:17 |
Buying rack & pinions in South Africa | JanJC | Archives | 1 | Tue 16 October 2007 23:41 |