#31
|
|||
|
|||
NCpod Manual
http://www.machsupport.com/artsoft/plugin.htm
Looks like we finally have a NCpod manual. Oh happy day! |
#32
|
|||
|
|||
i have changed the number of pulse in ncpod2.ini from 1548.14 to only 15 in all motors.
So that i can view the pulse in lower speed. But, my ncpod doesnt produce any pulse out . Any body knows why? (i still fail to get ncpod start) I 've tried all forms from main form to jogXbuilder, and i've tried all motor output, no output. Yet, in the debug form, there is output of 10000. NCPOD driver has been installed. The communication is connected. thanks |
#33
|
|||
|
|||
[NcPod] How to download the sequence of code into SD RAM
[NcPod] How to download the sequence of code into SD RAM
Suppose, we have the sequence of the code how the motors should run. How to download it into the SD RAM? Any example? thanks |
#34
|
|||
|
|||
Stn2008, wish we could help you, but nobody here has run a NCpod yet.
|
#35
|
|||
|
|||
I bought one - Just arrived the other day.
After I get the PMDX up and running. I plan on experimenting with the NCPod. Dang it's small. It's almost "smaller" than a Gecko.....tiny. Sean |
#36
|
|||
|
|||
Anyone used the ncPod?
Has anyone used the ncPod yet? It is $110 with shipping (beta at this time). It's got:
Photos of unit: . Hookup Diagram: http://www.cncteknix.com/ncpod/ncpod_diagram.pdf Video of the unit in operation (note: it's 17mb in size): www.cncteknix.com/video/motiontest.mpg An announcement from Art of Mach3 about the unit: http://groups.yahoo.com/group/mach1m.../message/67189 It seems to have fallen off the radar since early 2007.... Just wondering... Last edited by Alan_c; Thu 22 May 2008 at 15:00.. Reason: Moved post to existing thread - please check before starting new threads |
#37
|
|||
|
|||
I own it. So does Gerald.
When I have more than a couple of free days to play in the shop, I am going to set it up on my current machine to see how it performs. That picture is deceiving, it's about the size of a gecko drive......really small! |
#38
|
|||
|
|||
Since the price was so low, I ordered one also. I'd love to hear back on your testing.
|
#39
|
|||
|
|||
We have one too, it works on the bench, but we have not installed it for a real world test yet. It is so small, it looks like it belongs next to the Geckos.
|
#40
|
|||
|
|||
Quote:
Last edited by dmoore; Sun 01 June 2008 at 09:32.. |
#41
|
|||
|
|||
I have a cnc shark which uses a NC pod.
I want to use it with mach3 and also basic control panel. I run two different classes that use different software. I see there is a usb driver for mach 3 called ncpod usb driver I see there is a firmware installer (v2031) for mach 3. Is it a matter of changing drivers to suit mach3 and basic control panel? Or are there two firmware installers that are mutually exclusive? Can I swap between firmware versions easily? If so how? If I have two different pcs one with mach3 and drivers and the other with basic control ad drivers will that work? Thanks Peter. |
#42
|
|||
|
|||
Peter
I have some interest in your question, However this being a site for Mechmate builders I think it would be more appropriate to ask over at the Mach3 site, http://www.machsupport.com/forum/index.php I will watch for your post there. Greg |
|
|