![]() |
#1
|
|||
|
|||
![]() Hey all,
Quick introductions, I'm Dave from Brissy Australia. Long time reader but am finally ready to take the 1st steps in my own CNC I am totally new to this sort of thing but do have a strong interest in computers and electronics, work background is a Instrument/Electrical Tech, but no CNC experience. I am looking forward to the journey of building my very own mechmate, and know both Tony and Paul #71/#72 from another hobby fourm in the marine fish world ![]() Looking to mainly use the machine for some wood and acrylic fabrication, with the possible occasional alimininum cut here and there. I'm thinking to go a 10x5' or 10x4' table to suit a full 8x4 sheet, and have room for an indexer at the end later. But for now, Step 0 read read and read some more haha Step 1 is to ge the plans and print. Cheers Dave |
#2
|
|||
|
|||
Welcome and good luck with your build.
|
#3
|
|||
|
|||
Welcome Dave, you finally made it here!!
You might also want to read and check out Surfcnc's thread, Ross is another fellow MM'er here in Brissie so you have a few of us around. Please feel free to drop me a note if you ever want to catch up ![]() Once again welcome and I look forward to following your build. Cheers Tony. |
#4
|
|||
|
|||
Welcome to the team !!!
|
#5
|
|||
|
|||
Quick question just looking into prices of stuff through work, how many metres of cables is generally used roughly in the runs for the motors (the 4C screened cable).
I realise it differs depending on table size etc i'm just after a rough meterage that anyone has found it to take. 50-100m? Cheers Dave |
#6
|
|||
|
|||
Dave,
One thing you will need to familirise yourself with, is posting in the correct section of the forum, try this one for your motor cable question. Most of the answers to your questions will be in the threads, the trick is to read and read some more and if you cannot find your answer I am sure someone will help you out pretty quickly. Cheers Tony. |
#7
|
|||
|
|||
Greetings Dave
Building our machines has been very rewarding for the Brisbane guys. You got plenty of time to figure the cable runs, buy the plans from Metalhead Mike and know them backwards is the best advice I can give. Your build coast will be around twice the cheap build costs you might read about from USA builders and of course plenty of time building. Surprisingly sourcing and shopping takes up big lumps of additional time. Regards Ross |
#8
|
|||
|
|||
So its been awhile since I've posted, but I haven't disappeared, I've been searching for distributors for various parts and getting prices on bits n pieces.
I've also started on the electronics side of things, I picked up 2x 3/4 part rolls of VSD cable from my work for cheap which should be more than enough when it comes time to wire up the motors. ![]() I've also ordered and received my motors, I went for 5x PK299 F4.5A motors with the intention to use one as a indexer motor on a spare lathe that I picked up for free. ![]() ![]() ![]() and I've started building up the base layout for the control box. I have 5 203v gecko drivers with PMDX-133 cards going to a PMDX-126 BOB. I'm using a 500VA 35V transformer to power the motors, with the PMDX-135 rectifier. I'm will also be running a 24v system for all the control circuit, this will power the coil for the main contactor as well as run the start/stop/emerg stop buttons etc. ![]() ![]() ![]() and thats all for now, I have a ethernet smooth stepper attached to the bob and with any luck i'll have enough time to finish mounting everything up and wire it with within the next 2-3 weeks work pending Thanks Dave |
#9
|
|||
|
|||
great job on the electronics.
but you havent start the fun part.. metal work. lets do some sparks. |
#10
|
|||
|
|||
Yep !!
Come on Dave, where is the steel? Get this Aussie MM show on the road mate !! Cheers Tony |
#11
|
|||
|
|||
Good to see some quality parts going in, that always pays off over time.
Ross |
#12
|
|||
|
|||
Calm down there Tony
![]() ![]() I also had the wrong contactor sent of which i didn't realise until i powered up (24v AC coil instead of DC) whihc i'm waiting to get replaced so I bypassed it (messy wiring thanks to it haha) to give the motors a test and tune the drivers ![]() I'm working on the table bom atm and will order the steel as soon as I can, and when the weather decides we can have a break. Am looking at a similar table layout as you had Tony, but with a space for an indexer at the end sort of like these quick renders http://daveshotit.com/mechmate/Table/render_plan1.jpeg http://daveshotit.com/mechmate/Table/render_plan2.jpeg Last edited by BooY; Sun 03 March 2013 at 03:43.. |
#13
|
|||
|
|||
Haha Dave !!
No excuses excepted here mate ![]() ![]() Good luck with it all Cheers Tony. |
#14
|
|||
|
|||
OK Tony, no excuses. I think i have all the measurements sorted now
Plus left over steel I already have around to build what will be the indexer platform Which if I didn't screw up should give me something looking like this ![]() |
#15
|
|||
|
|||
Looks Good Dave
Will keep watching, just started my build. !
|
#16
|
|||
|
|||
so delivery came today
![]() ![]() ![]() And steel has been ordered ETA is ment to be friday. the Z slide has also been ordered |
#17
|
|||
|
|||
Dave,
Like the picture of the foot to show the scale of the parts. ![]() Slow and steady will always get it done. Looks good so far. |
#18
|
|||
|
|||
and steel delivery has arrived
![]() Effort and a half however to move it off the front lawn into the carport solo lol ![]() ![]() |
#19
|
|||
|
|||
Have started welding up the Frames for the legs. next will be to cut the main X beam angle and end plates
![]() ![]() |
#20
|
|||
|
|||
Looks like you're moving along just fine. Looking good
![]() |
#21
|
|||
|
|||
Just came in side for a quick water break and thought i might do a quick update, its been pritty hot round here last couple of days.
![]() ![]() ![]() ![]() and the obligatory bad welding photo ![]() Cheers Dave |
#22
|
|||
|
|||
and last photos of end of days work
![]() ![]() |
#23
|
|||
|
|||
I see how you sex it up with a few palms in the background, I'm jealous, nothing but snow on the ground here. Good work.
|
#24
|
|||
|
|||
At least you can definitely say you don't have any gas leaks, I usually use soap bubbles.
![]() Looks great though. I did not get enough pictures to show my progress. It is great that you post them. Keep up the great work. |
#25
|
|||
|
|||
Water break ?
![]() I just came in for a warm water break to warm my hands up ! ![]() minus 1 here, cold steel isn't nice to play with. Wishing it was warmer here. Good luck with your build. what size was that inverter welder in the photos ? Cheers Andrew |
#26
|
|||
|
|||
Haha Pete, I'd usually use snoop to check for leaks. But to be sure I turned off the bottles before welding and threw a kevlar/fibreglass welding mat over them before welding that corner.
bad luck with the -1 temps there Andrew, we are 28-32C pritty constantly but the humidity kills you more than the temp. The welder is a 170amp uni mig, the welder at work recommended it as a decent portable unit so got one in for me at trade price couple of years ago ![]() http://www.unimig.com.au/catalogue_p...subcategory=19 <--- thats it there if you wanna see the specs Last edited by BooY; Tue 26 March 2013 at 18:12.. |
#27
|
|||
|
|||
quick photo update
![]() ![]() |
#28
|
|||
|
|||
I was just picking. Looks like you are coming along well. I started mine in the cold weather and was dragging in and out of the snow to weld it. I used a bolt together design because I will be moving it in the future and I needed to fit out the doorway. It was hard enough to move by myself. I admire all of you that weld solid and move them.
|
#29
|
|||
|
|||
Y supports, end caps and leg caps welded in. now ready to flip over
![]() ![]() |
#30
|
|||
|
|||
Hi Dave,
I am impressed !! ![]() Cheers Tony. |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
First Cuts And Has Stickers! #126 - Genesee, WI | hflwaterski | MechMates already cutting | 215 | Tue 11 April 2017 12:00 |
Mod woke up and gave #115 - Sacramento CA USA | Zouave | MechMates already cutting | 173 | Sat 07 June 2014 02:05 |
My Mechmate coming up - India | Manjeet Singh | Construction started, but not cutting yet | 13 | Sat 24 May 2014 22:49 |
Cutting 'Red Gum' Slabs for Table Tops - South Australia | Quadro | Miscellaneous / General / Whatever / Catchall | 1 | Wed 11 January 2012 23:23 |
Cutting mdf doors, laser coming? #1 - Sri Lanka | fabrica | MechMates already cutting | 192 | Wed 23 January 2008 21:17 |