#1
|
|||
|
|||
Got the Plans, Now What? Freedom, USA
I just purchased the plans for the cnc router looking forward to starting my build. do you have any ideas or suggestions were to start
Last edited by don15042; Wed 16 April 2014 at 10:41.. |
#2
|
|||
|
|||
Yep......
going trough...thoroughly the plans....1st Then....build it |
#3
|
|||
|
|||
Go to the intros and tell us a little about yourself and what your proposed uses are, when you have the chance.
Lots of brilliant minds here willing to help out. (and me... ) |
#4
|
|||
|
|||
Read , read , read the build threads...
I also suggest you read as much as possible the build threads. Oh and start buying parts from me! |
#5
|
|||
|
|||
If there is one thing I can suggest is read and re-read the plans noting every little thing you can find. I know from my build that I didn't read them well enough and it has come back to bite me in the bum, requiring me to do things over and to regret doing other things. If you do that plus read as many build threads that you can you will be well along the way of a successful build.
|
#6
|
|||
|
|||
Short Answer, Read.....
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Plans won't download? | Galt1x@comcast.net | About this Forum | 19 | Thu 06 November 2014 10:57 |
MechMate Plans | Wood In It | Introduce yourself and start planning | 17 | Mon 20 October 2014 21:34 |
Where are the plans | keith1959 | Introduce yourself and start planning | 1 | Sat 24 March 2012 05:11 |
dfx plans where | oscaryrc | Introduce yourself and start planning | 5 | Wed 06 October 2010 03:38 |
FREE Plans | iqchallenged | Golden Resources | 0 | Fri 16 April 2010 11:14 |