MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Computing, Software & Programming > CAM
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Sat 18 October 2014, 17:05
st_indigo
Just call me: Philip.X.Diaz #123
 
Los Angeles, CA
United States of America
AutoDesk Fusion 360 - Native on Macintosh!

Has anyone else tried Fusion 360 from AutoDesk?

I was continuing my fruitless, years-long search for a CAM app that runs native on OS X, and found that the latest version of AutoDesk Fusion 360 does just that. Exciting!

I've been using it for a couple weeks now for 2.5D work and it has done well so far. It includes very useful options for lead ins, tabs, and cornering, as well as letting you define your work holding clamp/jig/vice so that you do not cut into them. Toolpaths for parts can be made within the 3d CAD model, with router axes oriented to each part - so there's no need to "explode" your model to cut out a part.

One of my favorite features is the timeline editing interface. It lets you go back in your time line to make changes in part creation and machining that auto-update, and don't require you to retrace, subsequent steps - a very powerful and convenient way to work.

AutoDesk offers a FREE license for personal use, so if you want to give it a try, you can do it at no cost. If you use it professionally, they offer licensing on a monthly, quarterly or annual basis, currently $40, $115 and $300 USD.

(note: I have no ties to AutoDesk or Fusion, other than being totally excited that someone has finally made a Mac-based solution for CAD/CAM)

I would love to hear from anyone who tries it.

http://fusion360.autodesk.com/about
Reply With Quote
  #2  
Old Sun 19 October 2014, 15:02
Fox
Just call me: Fox
 
Amsterdam
Netherlands
I heard more good stories on it, being free for personal use being the main plus and quite capable... Have not used it, but glanced at it. I was stopped by the cloud thing... I like offline. It's my data and I share when I want it.

For a business I do not like the recurring fees... it adds up quickly, and you end up paying more for it than other software. I'm using several cad tools extensively and it takes years to become fluent in each cad software - so professionally there's no use in learning it if you not going to use it for a longer period of time...

Personal use... Free is cool, and it's quite capable... But what do you do when they start charging for personal use.. it's an old marketing trick, even used on the streets... Give some for free, charge them when they are hooked

Last edited by Fox; Sun 19 October 2014 at 15:07..
Reply With Quote
  #3  
Old Sun 19 October 2014, 15:34
ger21
Just call me: Ger
 
Detroit, MI
United States of America
I'm not sure how long this is going to be free.
Next year, Autodesk is moving all their software to a subscription based model.
They claim it's to better serve their customers, but it's really just to make more money.
Reply With Quote
  #4  
Old Sun 19 October 2014, 17:29
pblackburn
Just call me: Pete #98
 
South-Central Pennsylvania
United States of America
You must also be careful of the cloud based software. You can lose rights to stuff you do not wish to. Read the license agreements careful. Free is not always a good thing. I was always told that if it is free, look for the catch as very little is truly free.
Reply With Quote
  #5  
Old Sun 19 October 2014, 19:04
racedirector
Just call me: Bruce #122
 
New South Wales
Australia
I wouldn't touch free cloud based software as as been said, the "free" could go "paid" at any time. When it does that ALL your work is gone or locked up until your fork over dollars. I may be in the older crowd who is always wary of anything free that you do not store your work on a local machine but there have been too many things go wrong with this model that everyone should be careful.

Stick to locally installed software, you'll be better off in the long run.
Reply With Quote
  #6  
Old Sun 19 October 2014, 22:12
Duds
Just call me: Dale
 
Canberra
Australia
I think you won't have a lot of choice, "in the long run", you will be using cloud services or stuck on software that is out of date. If you have seen what's happened in accounting services they have pretty much all gone too the cloud and offer minimal support to customers on running desktop services. It has been a rocky transition but hasn't been all that bad an outcome and there are benefits to cloud services.
More competition
Better data portability
Real and better consideration of IP ownership in legal theory.
Better data integrity
Better data backup services and strategies
Increased opportunities for developers and startups

Of course the benefits cost and that's the cost of doing business. Just my 2c.
Reply With Quote
  #7  
Old Sun 19 October 2014, 22:20
pblackburn
Just call me: Pete #98
 
South-Central Pennsylvania
United States of America
I do agree with what you state. But you do have to read the EULA carefully. I have seen some that, where by using the free service you give away rights to images to the provider. So as with anything, it is buyer beware.
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Free Software -- Rhino--Autodesk--CAM??? GlennMaples Graphics & CAD 23 Wed 10 February 2016 04:25
is autodesk inventor 10 compatable? robmaxx Graphics & CAD 1 Sun 19 May 2013 03:48
Autodesk 123d garymo Graphics & CAD 2 Mon 23 May 2011 22:54


All times are GMT -6. The time now is 16:47.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.