MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Archives
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Closed Thread
 
Thread Tools
  #1  
Old Fri 08 August 2008, 20:37
Glenn D
Just call me: Glenn
 
Baton Rouge, La.
United States of America
Unknown stepper motor

Help I bought a PIG in a Poke! I was toll that it was a Shop Bot kit. What I ended up with was a standard shopbot control box, some wire and 4 stepper motor. The motor have 8 wires a p/n 90HS65DE053 No manufactory That it! I called Shop Bot all there motor have 4 wire. I'm looking for information on are even if these motor can be used. Also Im looking for the wiring connector from the Shopbot control box to the motor. Thanks
  #2  
Old Fri 08 August 2008, 21:22
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
That motor p/n doesn't ring any bells. Can you post some pictures of it? Also, the ShopBot control boxes have changed over the years, can you take pics of the control board inside that box?
  #3  
Old Sat 09 August 2008, 07:15
Glenn D
Just call me: Glenn
 
Baton Rouge, La.
United States of America
unnone stepper motor

I hope this helps
Attached Images
File Type: jpg IMG_1660_1_1_1_1_1_1_1.JPG (29.1 KB, 140 views)
File Type: jpg IMG_1670_2_2_1_2_1.JPG (43.9 KB, 140 views)
  #4  
Old Sat 09 August 2008, 08:17
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
The ShopBot control box looks like a 4G with 4 Gecko 203V drives stacked one above the other - you need to get a closer pic to confirm that. If it is indeed A SB Version4G then that part has some merit - but you will have to join the ShopBot forum for support. (I would not use the 4G as presented in that PC case - I would strip out the Geckos, the power supply, get a decent cabinet, a fan & a PMDX-122.)

The motor unfortunately is too small, unless that is a big mug of coffee. That motor was never used by SB.
  #5  
Old Sat 09 August 2008, 08:26
Gerald D
Just call me: Gerald (retired)
 
Cape Town
South Africa
http://www.shopbottools.com/prt_4g_upgrade.htm (They since changed the power supply)
  #6  
Old Sat 09 August 2008, 18:33
Glenn D
Just call me: Glenn
 
Baton Rouge, La.
United States of America
unknown stepper motor

Well the box is pertty. Thanks for your time just another set back glenn
Closed Thread

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:10.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.