#31
|
|||
|
|||
more like lack of it
|
#32
|
|||
|
|||
Read the patent claims carefully - that patent is based on a pneumatic counterbalance for the weight. (Page 9 line 32, left column)
|
#33
|
|||
|
|||
you guys are right, I didn't read the complete claim, just the first part and did draw my conclusions.
my bad... Ries |
#34
|
|||
|
|||
how does the counterbalance claim differ from the gas shock on the Z-axis?
the counterbalance claim addresses compensating for the effects of gravity on the toolhead however, gravity also affects the workpiece i expect one would need to compensate for that also /robin |
#35
|
|||
|
|||
Very interesting Ries. It looks as if they are using air pressure to provide the "counterweight"
on edit: oops, I should have read the other replies. Last edited by lumberjack_jeff; Sat 09 January 2010 at 18:28.. Reason: oops |
#36
|
|||
|
|||
The pneumatic counterbalance is a small part of their claim. Their whole claim must be read in totality and that is describing a very different machine to a standard horizontal table router.
|
#37
|
|||
|
|||
Sorry for drifting anyway vertical machine come up every once in a while in forums and camtec space maker is an existing machine .cheking for their pattent is because I am curious .I would get a bigger place instead of that .Unless I wanted to put in a store window for people to see . I gess they dont want other to build vertical tilting machine with that pressure compensating valve from NUMATICS or other company .I always tough it was hydraulic.
Maybe it would work for very long z drive? see I am drifting again Normand |
#38
|
|||
|
|||
Quite common for big machines . . .
|
#39
|
|||
|
|||
wow like power steering ... with air would work horisontal to I gess ? on a lathe
Last edited by normand blais; Sun 10 January 2010 at 04:54.. |
#40
|
|||
|
|||
Hi guys.. miss your thoughts.. and yes its...
Quote:
SEYA /oopz |
#41
|
|||
|
|||
Can anyone explain what this means? I assume it means a standard DC motor appropriately sized would have a rack and pinion setup like the stepper on the Y-car (on the opposite side of the stepper) but would be persistently energized to conter the force of gravity pulling the Y-car to the base bottom of a vertically mounted Y axis. However, wouldn't the motor windings burn out if the Y-car stayed stationary for a long time? Please correct me if my assumptions are incorrect. Thanks in advance.
|
#42
|
|||
|
|||
Your assumption is correct, it's just a DC motor holding teh z up.
The motor would not burn if it's suitable for the job. As per comparison: my stepper motors arrached to the z-plate doesn't have the spring yet, but the stepper holds the whole z-plate + router up perfectly, constantly energized! Ries Last edited by riesvantwisk; Fri 12 March 2010 at 10:31.. |
#43
|
|||
|
|||
Ries, thanks for the clarification.
|
#44
|
|||
|
|||
David,
I wanted to add that not any DC motor is just suitable. DC motors are designed for rotational workload generating a airflow through the engine. If yo want to use a DC motor to do this sort of work, you properly need to upscale it so that the mass of the engine is enough to coil the coil down enough. Ries |
#45
|
|||
|
|||
Quote:
but that is just my understanding |
#46
|
|||
|
|||
Nope, I meant a DC motor. All DC motors will tolerate a certain amount of current before they need cooling. Motors used as "servo" motors should publish the constant current and peak current values......it is the constant current value that is of interest for this application.
Think of the z-axis on a "servo"-driven router. . . . . it sees little movement/cooling. |
#47
|
|||
|
|||
Ok, got it. How would one size such a motor? Would it be based on the weight of the entire Y-car after it was mounted to such a slated table? Would this be a better solution than a counter weight contraption like the "Pullman Industrial Balancer" sold by McMasters mentioned in another post? I believe that post is here for those who have no idea what I'm talking about http://www.mechmate.com/forums/showt...ring#post18959
|
#48
|
|||
|
|||
OK.. I stand corrected. but in my opinion a counter weight would make more sense... as in an elevator.
|
#49
|
|||
|
|||
A counterweight would have to run on its own rails (it can't swing around like a pendulum from the moving carriage)..........or slide with a good fit inside the gantry tubes........
|
#50
|
|||
|
|||
yes! and since this would be a slanted design it could be placed in what would normally be the under side of the machine...
But also I think it would have to be very heavy to counter the Z carriage... |
|
|