MechMate CNC Router Forum

Go Back   MechMate CNC Router Forum > Personal Build Histories > MechMates already cutting
Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Reply
 
Thread Tools
  #1  
Old Mon 11 April 2016, 15:04
james burrus
Just call me: james
 
new jersey
United States of America
The plans you get

The plans you get did you give any details for size machine 5 x 10 and what electronics are motors to use i'm a full-time cabinetmaker and I hate started it and not finish it , they want way too much for the techno our shop bot i'd like to get started but I like to know what information the plans come with I need help i'm very busy with my job but I can spare some time to get started
Reply With Quote
  #2  
Old Mon 11 April 2016, 21:10
darren salyer
Just call me: Darren #101
 
Wentzville mo
United States of America
Welcome aboard James. The plans have the formula to determine build sizes for whatever size machine you'd like. As far as motors, Metalhead sells a package, or there are other options listed in the forum.
Reply With Quote
  #3  
Old Tue 12 April 2016, 05:25
MetalHead
Just call me: Mike
 
Columbiana AL
United States of America
Just let me know what you need. Once you decide on your size, the forum provides a wealth of knowledge on building the machine. I have sets that will make the electrics very straight forward.
Reply With Quote
  #4  
Old Tue 12 April 2016, 07:07
servant74
Just call me: Jack
 
Nashville (Tennessee)
United States of America
The calculations on size are exact in the plans, but think add about 2' to the X and to the Y for floor space calculations, and add some room to work around AT LEAST 2 sides, preferably 3 or 4. Most folks make it 'end load' (the short way across rectangular shape), but there are those that have done the 'long way'. The difference is the length of the traveling trolley, longer makes it heavier and the bending force component is proportionately larger.

Whatever you choose, I suggest reading the forums, and read more till you get sick of it. If you still are 'in', purchase the plans. Then study, read more, and ask questions, before plunking down your cash. It increases your chance for success to do the study up front before purchasing more.

Enjoy!
Reply With Quote
  #5  
Old Tue 12 April 2016, 07:36
hflwaterski
Just call me: Herb #126
 
Genesee, WI
United States of America
Welcome James! My observations coming from a person who recently finished a MechMate build, unless you are doing something radically different design-wise, there are really very, very few questions that haven't been covered in detail. It's all there but sometimes it takes a bit of digging. It does take quite a bit of homework and research to minimize the spend and potentially save time down the road. I was on the opposite end and it took me a really...REALLY, long time to finish mine. KornerKing is an exception on how fast you can build a machine but I suspect he'd been lurking and studying for quite a while before diving in. Good luck with your build if you choose to go forward!
Reply With Quote
  #6  
Old Tue 12 April 2016, 15:30
darren salyer
Just call me: Darren #101
 
Wentzville mo
United States of America
KornerKing also had almost all the parts on hand before committing. A huge timesaver.
Reply With Quote
  #7  
Old Wed 13 April 2016, 05:33
Kornerking
Just call me: Pete #127
 
Big Falls, Mn
United States of America
James, it only looks scary for a short while. As you progress with the build it all starts to fit together.
I was like you. Busy, busy , busy. Then I got fed up with employees who wouldn't show up for work and vendors who took forever to deliver components. Last December we made the commitment to go ahead and started buying materials. I had bought the electronics from Darren a year prior so I had them already. I had browsed the forum prior to this time but hadn't really studied it.
Starting Feb 10, we approached it like a kitchen build. We made it another job going through our shop. Using the plans and the forum as a guideline, we built each section of the machine. That way it didn't overwhelm us. Bottom line is we completed our mechmate in about 150 man hours. It is cutting everyday, and has already started paying back its investment of around 7,000, and we should see a full payback in a few months.
As an added bonus we have been able to remove a lot of single use machines and de-clutter our shop.
If you are busy don't waste your time trying to save a few bucks by scrounging around for materials. Your time is worth more building your machine. Find a good steel company and buy your steel. Buy the kit from Mike (Metalhead). Use Mcmaster Carr for things like cable chain, gas shocks, rack and pinion, etc. Fast service and I guess ok pricing.
Oh, and you may as well buy your blue paint.

The 7,000 did not include our metal working equipment. Welder, chopsaw, etc.

Last edited by Kornerking; Wed 13 April 2016 at 05:36..
Reply With Quote
Reply

Register Options Profile Last 1 | 3 | 7 Days Search Today's Posts Mark Forums Read

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plans won't download? Galt1x@comcast.net About this Forum 19 Thu 06 November 2014 10:57
MechMate Plans Wood In It Introduce yourself and start planning 17 Mon 20 October 2014 21:34
Got the Plans, Now What? Freedom, USA don15042 Introduce yourself and start planning 5 Fri 18 April 2014 11:17
Where are the plans keith1959 Introduce yourself and start planning 1 Sat 24 March 2012 05:11
dfx plans where oscaryrc Introduce yourself and start planning 5 Wed 06 October 2010 03:38


All times are GMT -6. The time now is 14:17.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.