#571
|
|||
|
|||
Thanks will try just got 10 years older
|
#572
|
|||
|
|||
Why so silent ??? catching up with backlog or are you sweeping the floor ?
|
#573
|
|||
|
|||
Kobus maybe we can subcontract to him if he is that busy.
|
#574
|
|||
|
|||
have been cutting till 8:00 last night started at 06:30 this morning.No Kobus vacume works overtime.Just got my first batch of Birch ply this afternoon to do do some cuboards.They said it is fine for the 15 th of Feb for that presentation.You need to tel me how many members are there.I am going to do a show with them.
|
#575
|
|||
|
|||
Marius It just came my Way. If you have an idea how to make a memory stick with a bamboo casing I have some work for you.If you have a machine ready I should know by Monday about a order for 900 wooden boxes Have to be ready by 12 Feb If it is a go maybe you can help me on that one Kobus you to you can do the lids.
|
#576
|
|||
|
|||
Wow Hennie, I was actually joking. I did not realize that you really are that busy. It is very good man I am happy for you that work is coming in at such a rate. If this keeps up, you will be on your feet and running in no time.
I dont know if my machine will be ready in time but I am more that willing to assist where I can. Just let me know. The casing for the memory stick, how small must it be? I am busy putting a very small machine together for a friend. It could maybe cut something like that. Do you have the electronics to work from? |
#577
|
|||
|
|||
Marius, I will have some info by Monday If I had a hat I would have pulled a trick out of it but at this stage don`t know where to start.
|
#578
|
|||
|
|||
These things will easing fit in your bamboo housing: http://www.dealextreme.com/p/smalles...over-blue-7134 (I bought some and they actually do work)
|
#579
|
|||
|
|||
You know me I am LAZY..... and THAT sounds like WORK
We have about 90 people at our monthly woodworkers meeting...sometimes more sometimes less. Please confirm that you can do it for that night.. sounds like you will be very busy the next month. |
#580
|
|||
|
|||
Thanks Gerald will look into it.I got involved with a Marketing company that is all green so they come up with the ideas but someone still needs to figure out how to make it happen.Kobus I will let Them contact you Monday to make the arrangements I thought it was only 15 old timers that did this for a hobby wow! 90 people sounds good.How is that coffee this afternoon. Have to put some time in this morning on the machine have to catch up on some serious cutting.
|
#581
|
|||
|
|||
A funny thing happened Yesterday for the first time I had a fuse blown in my control box,one from the mains, ok fuse was replaced.This morning I switched the machine on and guess what it took of in the x- direction and no signal to the machine again!.I plugged the cable out of the computer and the ghostly motion stopped.So the problem is at the computer again.All looks ok in the control box.
|
#582
|
|||
|
|||
Die WOESRAND SPOOK loop weer
|
#583
|
|||
|
|||
Praat jy.Ok I managed to get one of the old computers working that packed up a week ago that the computer Nerd told me in plain Afrikaans "hy het sy gat gesien".The same thing happened so by the way the computers are not even switched on.It let me think since I use a broom often and my shop assistant cleans every day in the morning and in the afternoons he might have stepped on or damaged one of my cables going to the machine.Kobus I gave the details to the powers so hopefully thei will contact Denis.
|
#584
|
|||
|
|||
Hennie, silly question. What does your earth on the machine look like? If you wired the limits according to the MM drawing, you will have neutral running all over the machine. If the earth is not good, funnies will happen.
|
#585
|
|||
|
|||
Marius ,I will check it but is was working fine for the last 2 Years.I have no limits on the machine just the motor wires didn`t bother to fit them although I have made provision for it.
|
#586
|
|||
|
|||
Thanks Hennie,,,Bamboo talk is on Denis confirmed this morning
|
#587
|
|||
|
|||
Pleasure, now come and get your backside at my place and help me sort out this Ghost thing
|
#588
|
|||
|
|||
I can't use a broom
|
#589
|
|||
|
|||
It`s ok sorted it out.Since I built the MM I was using it no hassle this morning wow it gives trouble .I had the Bob attached to the body of the box( metal plate that everything is bolted on to) loosened the bob hanging free guess what no more ghosts the thing is working fine.Now to trace the fault.
|
#590
|
|||
|
|||
Bamboo round table
I was asked by The Bamboo company to make a round table for them so I asked them what would be the spec`s so they said just make us a round table So I did and are they going to get a surprise .
The pic`s show legs cut and as the table progressed I thought that I can do some inlay`s last pic of the inlays where before final coat of sealer. |
#591
|
|||
|
|||
Nice table Hennie!
|
#592
|
|||
|
|||
Very nice!...and you still have time to push that broom around
|
#593
|
|||
|
|||
Yes Alan notice the broom on pic no 3 leaning against the MM Can you see the broom Kobus?
|
#594
|
|||
|
|||
What is a Broom ????
|
#595
|
|||
|
|||
Hennie,
Very nice table. |
#596
|
|||
|
|||
Hennie, Looks like you are incapable of building a simple round table...
Love the table! Kobus, Broom? Mythical personal transporter... |
#597
|
|||
|
|||
Henne, very special.
I particularly like your asymmetrical legs, it looks like it has movement. Cheers Ross |
#598
|
|||
|
|||
oooooh Harry Plotters Scooter
|
#599
|
|||
|
|||
Here is a pic of the table complete
|
#600
|
|||
|
|||
Looks very nice Hennie.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another Mechmate in Progress - Atlanta GA | Jay Waters | Construction started, but not cutting yet | 33 | Fri 22 April 2011 07:35 |
cnc wood lathe | javeria | Miscellaneous / General / Whatever / Catchall | 5 | Fri 11 March 2011 08:12 |
Starting to make progress | peter__jackson | Construction started, but not cutting yet | 7 | Wed 27 October 2010 10:28 |
Lathe cabinet | lumberjack_jeff | The Show Room | 2 | Sun 26 September 2010 20:41 |
Website/ Forum for homemade/conversion cnc lathe? | jgc2521 | Miscellaneous / General / Whatever / Catchall | 1 | Sun 28 February 2010 00:31 |