|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
|
Thread Tools |
#1
|
|||
|
|||
Lowest price Spindle/Inverter yet - $423
I never look for just the lowest price tools, but WOW, a 2.2Kw water cooled Spindle (with German bearings) and a Huanyang HY-05D5 inverter for $423!
So, with shipping that comes to the price of 2 Milwaukee routers. If anyone was on the fence about the whole router/spindle debate, I think this could be the push that puts you over the edge: http://cgi.ebay.com/WATER-COOLE-MOTO...d=p3286.c0.m14 |
#2
|
|||
|
|||
I am seriously thinking of getting a similar spindle, the 4KW air cooled unit,
I was wondering if any one has one of these or similar, to comment on how it is working, of all the things I have read I have not seen a negative report yet, I was also wondering if mach can control the VFD on these units, I have asked for more info but no reply yet thanks//chopper |
#3
|
|||
|
|||
It is still my opinion that whatever the somewhat VERY INTERESTING low price on these Chinese spindles, your still in better with a simple router set up for starters.
Simple, no VFD complication setting to start. Yes, anyone will admit a spindle will always outperform a router, but will also add additional stress on you & set up to get thing working for any newbee to the CNC world !! KEEP it as simple as you can as a new start, minimize pitfall if your MechMate is a new CNC venture. When everything rolls fine, you’re comfortable with all mechanics, electronics & software function, then like anything else, you will naturally want to upgrade to improve if needed. One thing for sure, you will be in a better position to see if it is needed only after some time, that is if it is your 1st CNC venture that is !! |
#4
|
|||
|
|||
Isn't there already a thread about this eBay offer?
|
#5
|
|||
|
|||
The other thread was in Euros and was more money for us in the USA.
This one deceptively states its location as Hong Kong, United States - but I assume it's HK because of the $90 shipping from EMS. |
#6
|
|||
|
|||
This is the other thread: Found this Spindle...please comment
The e-Bay Offer there is: http://cgi.ebay.de/WATER-COOLE-MOTOR...1262&_trkparms Compared to your find which is: http://cgi.ebay.com/WATER-COOLE-MOTO...d=p3286.c0.m14 Looks the same thing to me, slightly different dollar prices |
#7
|
|||
|
|||
Yep, looks like the German eBay listing charges more money for some reason.
The USA listing also says you can "Make Offer", maybe I'll try $375 and see if they bite. PS: I also liked the expired certificate, certifying them for medical equipment near the bottom of the page. |
#8
|
|||
|
|||
you mean the FAKE certificate?
Take a look at the differences between the company name and the rest of the typography |
#9
|
|||
|
|||
LOL!! I did not even notice that.
I wonder how German their German bearings are... |
#10
|
|||
|
|||
They are probably just German quality, made in china. With a 100% goldenique finish.
|
Register | Options | Profile | Last 1 | 3 | 7 Days | Search | Today's Posts | Mark Forums Read |
Thread Tools | |
|
|