#1
|
|||
|
|||
Suddenly, production! Cutting, Labels and Blue! #110 - Montgomery, IL
Hello,
My name is Armando and live in Montgomery a Chicago suburb. I have been collecting parts for a year or so and am ready to start putting toguether the table. I am looking to do a 5x9 size table it will have to be a bolt on since it will go in my basement. I've sourced most of the steel from craigslist to save money, the only problem with that is that finding the right size and thinckness was rather difficult, I have most of the electronic components also but started with the table first since it seemed the most daunting. I might have a question or two on the electronics but for the most part I've found the answer to almost all my questions within the threads. Have done most of the steel cuts with the grinder and a hand held metal bandsaw. Most of the drilling has been done with a electric hand drill. I guess you could say that I have more time than money. I plan to use the MM to make custom cabinets for the Kitchen, laundry room, garage and my basement workshop. I'm hoping to finish in 2 or 3 months. Pictures to follow Armando, |
#2
|
|||
|
|||
Sounds like you have the correct solution with the MM and desire to make a great addition to your tool compliment in the wood shed. Welcome!
|
#3
|
|||
|
|||
Welcome Armando.
|
#4
|
|||
|
|||
Welcome !!! Looking for some pics now !!!
|
#5
|
|||
|
|||
Hello everyone
Time sure fly's fast when you are building a mechmate. My deadline of three months went out the window rather quickly. I've finally gotten around to collecting and resizing some pictures. I ended up going with an I beam for the x rails since I was not able to find cheap c channels of the right size. The legs out of 0.25" 4"x4" and 2"x2". For the rest I used of C channel I scored for cheap from an auction, I intended to use them for the xrails by stacking them on top of each other but were only 8 feet long. |
#6
|
|||
|
|||
I ended up making a ton of mistakes, I fixed some and others I just left and worked around. One was the gantry orientation, I ended leaving it since I had already drilled and installed the y cable chain support. After months of back aches and mistakes I was able to get the gantry rolling smoothly which I eagerly showed my wife, she asked if this meant I was ready to start making her built ins and cabinets.
|
#7
|
|||
|
|||
I ended up doing most of the drilling with a Milwaukee hand drill, if I had to do it all over gain I would buy a drill press in a heart beat. Even though building this mechmate was such a brilliant idea that makes sense in so so many levels my wife thought otherwise, I had to sell some of my festool woodworking tools and a few of my guns to finish buying everything I needed.
|
#8
|
|||
|
|||
That's looking good so far, welcome to the addiction.
I've been using cnc's for 20 years and everything I see I think umm! I could cnc one of those, and shortly looking at your build , so will you, good luck Regards Andrew |
#9
|
|||
|
|||
I know the feeling, my phone is loaded with pictures of things I've seen in stores that I'm pretty sure I could make better and cheaper.
|
#10
|
|||
|
|||
I ended up going with just the basics for the machine since I have way too many projects that can't wait any longer. The 1.5kw Air cooled spindle I got was definitely a must since the machine is in the basement.
Just finished cutting some small wings and tails for toy jet kits a friend is putting together for church camp, small parts are a challenge for sure. I also cut round window casings for a friend. I have also done small projects for my job that would be difficult doing by hand and have charged some nice overtime for it. The cut quality and precision is beyond anything I would be able to accomplish with my woodworking tools. I finally don't have to mess around with trying to cut a full sheets of plywood on my table saw, just throw it on the table and push the start button. I am half way in to cutting some closets and simple pantries for my sister and dust collection is now the highest priority upgrade. I had been cutting just small hardwood boards so dust was not a big problem. |
#11
|
|||
|
|||
This machine works great, makes projects so much easier specially cutting sheet goods. I purchased cabinets parts pro and it works great for the closets I am making. My wife is already putting together ideas for the kitchen of her dreams. I also went with VcarvPro since it was the only I could afford at the time. I will try to remember to take better pictures of the projects I make since looking at other peoples projects was what kept me going.
This decoration the wife saw at a store and I gave it a shot. |
#12
|
|||
|
|||
Armando, you have put a big smile on my face. I absolutely love it when a basic machine starts producing heaps of funny shaped boards! Well done!
|
#13
|
|||
|
|||
Thanks Gerald,
Was made possible thanks to the Mechmates great design and plans and the support from this website. For about six months when I was collecting parts I tried to drumup support and some cash by telling friends and family about my plans to build a large robot machine that would work tirelessly day and night cutting a kinds of closets, cabinets toys etc.... explained that it designed by a genious named Gerald in South Africa. Not sure what they imagined, but needless to say I only got 300 bucks from my sister who is now getting custom closets and pantries. |
#14
|
|||
|
|||
Looks great !!! Got some logo's to put on it? You bout ready for a Serial Number !!!
|
#15
|
|||
|
|||
Mike
I know you sent me some with the kits I got I just have to find them. I'll be doing some cleaning this weekend and am sure they'll turn up. |
#16
|
|||
|
|||
Armando, great job.
|
#17
|
|||
|
|||
Nice work there keep it up
|
#18
|
|||
|
|||
Work has me quite busy but I've still managed to do some work on the Mechmate. I tried cutting aluminum for the fist time and after trial and error I was able to cut 5/8 plate to a make small jig for work. I think I will be machining a spindle holder in the next few weeks to upgrade my current cheap clamps.
My transmissions kept coming loose on the big pulley even after I tried locktite. I ended up using some roll pins on them and its cutting great so far. |
#19
|
|||
|
|||
I ran through about 10 sheets of white melamine and finished some simple pantries for a relative. With a new upcut bit I was getting clean chip free cuts but eventually chips showed up on the long cuts on the top of the sheet it wasn't too bad though.
I also cut a few hundred wedding favors for a hollywood theme wedding. Movie clapper boards and little hollywood star plaques on black melamine. I vcarved the letters and star outline, had a hard time screwing the full sheet down to lay completely flat so as to not affect the depth of the letters. |
#20
|
|||
|
|||
well I see you found your logos ! Lets get you a sn !!! congrats!
|
#21
|
|||
|
|||
Thanks Mike,
I couldn't of done it without the help this site and its very generous and helpful members Build time was about 13 months and it has a 5'x9' cut area. |
#22
|
|||
|
|||
Updated Builder's Log
Armando,
Congratulations on completing you build and earning Serial #110. Here is the Updated Builder's Log with your entry added. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Miniature MechMate suddenly cutting - Johannesburg, S.Africa | paulus | MechMates already cutting | 49 | Fri 22 November 2013 21:14 |
Shrink Labels | MetalHead | The Market Place | 1 | Thu 20 October 2011 14:30 |
Z dropping suddenly - computer response is slower | javeria | Troubleshooting | 14 | Fri 23 April 2010 11:12 |
3D Sign from Blue Foam | astrolavista | The Show Room | 3 | Sun 12 July 2009 18:09 |
New registrations suddenly increased | Gerald D | Archives | 24 | Fri 09 January 2009 11:58 |